Left rear beacket installed. Each bracket was installed up against the bed-to-side joint weld interface. A 1-3/8 spacer between bracket and bed. Sto

making the bracket fit the bolt location. I actually removed the wrong bridge between holes and ended up removing the next inward bridge also. Measu

Hitch about 4 inches behind the axle. 28 inches from cab.

Finished hitch. You can see the 4 inches rear of wheel wells. The Bedrug was cut up and reinstalled in 3 pieces.

Left rear beacket installed. Each bracket was installed up against the bed-to-side joint weld interface. A 1-3/8 spacer between bracket and bed. Sto

Left front bracket installed. The position inside the frame rail for the bolt from the hitch rail is very limited by interferences. A fastening tab

Left rear marked. A backing plate of 1/4 steel was fabricated for the second stud and inserted behind the large hole in the rail.

Left front location marked

Left rear beacket installed. Each bracket was installed up against the bed-to-side joint weld interface. A 1-3/8 spacer between bracket and bed. Sto

john o-ESC
Jul 19, 2016

There are no comments to display.