Search results

Is the Zamp MTTP? If it is you can wire in series and you are good to go. If not you will need two MC4 branch connectors.

Not sure about the shading issue. I did the series to get max benefit from the MTTP controller, also you do get less loss in the FWC wiring from the roof to the controller. I still have my portable 120w solar in a bag folding panel. I have rewired the plugs on the sides of the camper to go to...

I would take out all the particle board. Will smell even if you get it dried out. Also heavy compared to plywood.

I did my own inside build. Not much room with the sink installed. Only a few clips holding the sink. Take the sink out and you have lots of room. EDIT found the picture I was looking for:

I am not a woodworker, I am sure a good woodworker would just replace the board. I like metal. Would open and glue the crack. Find an aluminum channel that would slip over the top of the crack and drill and put screws or long rivets to hold it in place. If you can not find a channel that fits HD...

Home Depot carries Pex supplies.

PEX clamp. EDIT. if that is a ridged connector you will need very hot water to soften the pex or you will need to cut it off. Working with Pex

Images WTW wind deflectors.

Rewired the loads to go through the Victron Smartsolar MTTP 100/20. Screenshots below show the LED lights, the heater, and the DC Fridge. A lot of information on the APP. I did have a 0.1 amp draw when I thought I had everything off. Took a minute to realize the draw was the Propane detector...

Nice job, I like it. Embedded videos below.

Yep on float, there is not much going on. Sure do like the Victron app.

Added a Victron MTTP SmartSolar 100/20 solar controller. Rewired from parallel to series today to take advantage of the higher voltage. Before and after pictures.

FWC has not used sliding doors for some time. The first hinged doors went up and then down as mine in the picture below. Agree the bins are not good storage.

I strongly disagree with removing a gray water tank from your criteria. You can add it yourself later, several ways to do it just do a search. Yes, the collapsible jugs work. I just enjoy stopping somewhere for lunch and being able to wash up without having to hook a hose up. We do not use a...

Was not sure what you were talking about so I looked. My 2013 Hawk has a hinged open-down door. Looked on the website and saw a bin and not a cabinet. Is this the new normal?

Air bags. 2005 Tundra and 2013 Hawk.

Several different ways to mount one. I have had a 4" ABS pipe tank on my truck for years. Used on my 2002 Hawk and now on my 2013 Hawk. This tank was for the 2002 Hawk and has been remade for my 2013 Hawk. I put the sink discharge to the front of the camper.

It is so light the front wheels don't touch the ground. Really buy a Pickup tent if you want a camper like that.

Got the new regulator installed. Everything working like new. I made a video of the pressure of the new regulator and the inside of the old regulator showing the oil inside. If you have any idea where the oil was from let me know. I cleaned the hose to the camper before putting everything back...

Russ, I did what you recommend several times at the Rally. I was aware of the check valve in the tank and have always opened the valve slowly.

At the FWC rally, I had my first mechanical problem. Our heater would Not light, and I could only get a small flame on the cooktop. I thought the tank might be empty and switched tanks. No help tapped on the regulator and got a small increase in the flame on the cooktop, enough to make coffee...

Have to disagree. Liked Sugarloaf a lot more, but I am not a horse person. Campers were to spread out to do a walk around, something I really enjoyed. Friday's WIND made eating in the barn a requirement with only tables for 1/2 the people there.

Some pictures saved in Google photos.

Loading up today, see everyone tomorrow.

How come there's 2 doors on a chicken coupe? Because if it had 4 doors, it would be a sedan.