Search results

Realized the heater was sitting too low in the cabinet, would have been tough to get clearance for intake ducting and combustion intake hose beneath. Decided to make a spacer for the turret mount to sit on, raising the heater up about 1/2 an inch. Heater sitting on the spacer, much mo...

Agree the 5 inch hole isn't 100% necessary. It does help with shielding heat thought with the unit raised up. If the unit was flush with the bottom of the cabinet, the air intake hose wouldn't clear the bed rail. Most of the YouTube mechanics seemed to be using these turret mounts so I figured I...

Ive seen a couple forum posts where people are plugging their IOTA DLS-30/IQ4 into their DCDC charger, as a workaround for the DLS-30/IQ4 not having a LiPO4 charging profile. Thoughts on this? First thoughts is it feels wrong but I have no idea why.

I decided to bench test the heater as once it's installed, it will be really difficult to get out. I couldn't get the unit to fire up fully, kept getting E-10 fault code. Which the internet says is either a Temp. Sensor Failure, or simply "Failure to start". I'm leaning towards the latter. I...

Made some progress today. The hardest part was figuring out how I wanted to mount the heater and where. Space for the combustion air intake and exhaust is tight as I only have 3 inches from the outermost wall of the camper to the bed rail of the truck. I settled on a turret mount, which...