Search results

I you search on the forum, I posted a "report" (I think) on how I replaced my refrigerator gasket. It wasn't easy or difficult but trying to find the right gasket and getting it made was a little difficult (getting it made was easy, find the right gasket wasn't quite so easy). The gasket I...

Have you thought about using something like a translucent tape and putting it over the LEDs? Our LEDS were too bright so I just used some electrical tape over some of them... problem solved. I'm thinking you could use something like those light colored/clear fabric Band-Aids.

If true, not good. I've had terrible customer service from Dometic and especially when they acquire a company (fantastic fan).

If you search the forum I'm sure there's a write up somewhere. Pretty easy if you can get access.

Yes, I think that's correct but I used the 120ah version. I have a write up that I did if you'd like it. Just PM your email as I don't know how to post the entire thing here. Kevin

I've built one and posted a lot of info on where I got the "cells" and parts I used. It's really pretty easy. The hard part is the terminology and getting the settings right. I've used mine on about 10 trips so far. No issues once I got the charging profiles dialed in and the DC-to-DC...

You are correct... use galvanized!

I don't think using longer screws will get you anything and not sure about those washers. I'd use stainless screws and put a glob of sealant over each screw head. It won't be pretty but it won't leak.

I'm not sure about that particular design (could be a step to help with the roof?) but when I gutted my older Eagle, most design decisions were for a reason which I discovered when I was dismantling it. It could have been a water tank, etc. There are some things I did find that are...

My LifePO4 battery build pack rests at about 13.3. I've been using it quite a bit (furnace) and so far it's been great. We don't use much power (refrig is on propane) and we just did a 3 night trip with only a slight drop due to the furnace usage in the morning (dropped to 13.2). Other usage...

Kris, Thanks! If I don't have an artic pack, will that just velcro to the existing velcro that the artic pack (female velcro) normally attaches to? I guess I'm asking if the pouches have "male" velcro (the rough or hoop) attached or if it's the female (softer or loop)? Thanks.

Any chance you could post pictures of the backside of the "All around 4x pouch" so I can see how it attaches to the velcro strip for the artic pack? We don't have the "pack" but need a pouch that will velcro to the strip near the interior roofline velcro. Thanks. Kevin

Man, that place must be "haunted" as it's been having a very bad last 10 years or so.

It needs a lot of work IMHO. Look at the interior (my 2001 has that white plastic on the inside and it's barely coming off) where the front is; the white plastic is a mess. I can't tell what shape the vinyl is in, it must weigh a lot w/ the wood counter top, repainted and the roof doesn't look...

Mother board? No spark but it fires up? I replaced all the inexpensive parts (jet, sail switch, etc.) until finally I replaced the board (with a Dinosaur (?) brand board) and no more issues but since yours is much newer, I can't believe it'd have problems that early but electronics can fail...

I'd say make a road trip and go to the factory and have it installed....

On my 2015 Ram, I don't have any issues with nav or XM (when I had it but I didn't use the radio much).

That's what I was noticing too. Ebay. Seems like the tanks are the Flame King horizontal tanks. YSN Imports YSN201HZL Propane Tank LIQUID TRANSFER TANK I just looked and they don't have anymore in stock but I'd contact them. When I got mine, it seemed like they had 4 or 5 of them. $96...

Update: I couldn't find a valve that was reasonably priced (about $60 plus propane) and I had a pretty full tank so I'd have to purge that propane, install the valve, replace the propane. Total price around $75. There was a small leak around the valve and I took it back to the place that...

I think they have a predefined setting for those batteries so that's where I'd start and then adjust as needed.

I had ATC do mine quite a few years ago (5?) and to be honest, I wouldn't try it myself unless I had help and a lot of time. Of course, I'm a bit closer than you to them but I pulled in one morning and before I left, they had the roof off and were working on it. Next morning... done. I also...

Things get more and more strange. We did what you said but we were camping so no soapy water so that's when I decided to close the valve and it was stuck. Got home, took the tank out and after a while, the valve turned and it was in the off position. I am going to call the place that...

We noticed some propane smell the other night and so I went to turn off the propane tank. I couldn't turn the knob so I am trying to decide what to do as I had the tank recertified about 6 months ago. I can't find out (or haven't yet) if the horizontal OPD valves are the same as the vertical...

So many things converging.... spring and covid pent up demand to get outdoors. I guess the used marketplace will reflect these lead times.

Why the "for sale", "not for sale", "for sale again"?