Search results

I have struggled on and off for six years with the problem of frig not getting cold enough. Sometimes it works like a charm, others not so much. My latest trip was on the Oregon Coast. Cool temps outside but frig still not cooling effectively. I have cleaned burner and orfice. Attempted cleaning...

Correct. Red positive. Black negative

Thanks, so much. Great info. I find the longer I wait to get into this new technology the more information I gather and the technology changes and hopefully becomes cheaper. Cheers

Does the Bluetooth in the battery give the same information as a shunt? What is the difference between the two? Thanks

This has happened to me. Corrosion in the bed plug was causing my truck taillights to glow very dimly. Cleaned up the greenish crude and problem went away.

I have a 2017 CTD. Love the exhaust brake. When I go downhill I hardly ever need to get on the brakes.

Phil- When you installed the DC/DC charger what gauge wire did you go with? Also, did you make a new camper to truck connection in the bed of your truck? Did you do away with the Blue Sea ACR? I keep tossing this idea around but the more I think about it just keeping the camper separate from...

2017 Ram Cummins. Engine brake coupled with Tow/Haul makes downhill much less stressful.

Mine is the RM-2354 and the burner looks completely different. Today I tried to blow compressed air through the flue and the burner. My frig operates very inconsistently. We just returned from a trip that included quite a bit of dust driving as well. I am going to leave mine running on propane...

What year is that fridge? Mine is a 2015 and looks different.

I have a 2015 and this has happened to me. Bubble then no bubble. Mystery

Thanks Stan. After running it on 5 for a few days it now lights and runs on lower numbers. Hopefully it was an issue because it hadn’t been lit for awhile. I’ll keep an eye on it.

Thanks. I have been advised it might be the thermocouple if the flame Only stands at the coldest setting. Troubleshooting begins.

My 3 way Dometic only lights on the coldest setting (5). Once lit if I move to a less cold setting (1,2,3,4) the pilot goes out and will not relight unless frog is set to 5. Any advice greatly appreciated. Works fine on 110v.

I don’t have the liner. I was wondering if the camper typically comes with Velcro on the lower part of the pop up. My vinyl has Velcro along the roofline but none on the lower part of the vinyl near the frame. Again, I don’t have the thermal liner.

I changed a 12v socket to two Blue Sea USB outlets. Works great.

Great ideas. I have a 2015 Grandby. It has Velcro on the top but not the bottom. Does it typically come with Velcro on the bottom? Thanks

I’ve never met you Ted, but your words and actions show me I think we’d get along well. I hope you enjoy you new rig. Safe travels.

The dinette area is actually set as a bed about 90% of the time. Thanks

I want to get a compressor fridge/freezer. I will store it under the table in my front dinette FWC. I was thinking of getting a Blue Sea 12v outlet and installing in the bench cabinet wall. I was thinking about running the wire from the outlet to the Blue Sea fuse box. See any reason why this...

With my Blue Sea 7611 I can charge my truck through solar, so until voltages drop below the connection threshold I imagine I will see the same voltage for both sets of batteries.

Thanks. I am considering a portable AC/DC fridge, behind the truck seat and powering from the existing 12v outlet. I figure if I install the BMV-712 I could also keep an eye on the starter battery voltage. The solar on the camper also charges my truck battery so I am fairly confident that I...

Would I be able to just measure voltage?

Thanks for all the help. Another question I have: If I ran the second positive wire to the Blue Sea isolator and connected it to the positive wire coming in from the truck, would that give me a way to track the voltage or SOC of the truck starting battery?

Yes. I read the manual for the Victron and it seems like a much more capable alternative. The set up also seems a bit simpler and cleaner. In the video, it appeared that the battery had to be discharged to begin setting up the monitor, Victron does not have this step and seems to be a smarter...