Search results

Global Solar 115W PowerFLEX+ BAPV Flexible CIGS Solar Panel × 2

So I bought a Seaflo quick-connect hose and sprayer and a bunch of Sharkbite connectors and this is how I routed the pex to the fresh water fill box.

This is the faucet I ended up with: https://www.amazon.com/dp/B07FMZVYVP/ref=cm_sw_em_r_mt_dp_U_Myu5CbG9QNGQK $40 It needed a shank extender, https://www.amazon.com/dp/B001F9N93A/ref=cm_sw_em_r_mt_dp_U_1Ku5CbNKZ17S0 and a standard 1/2" supply line with nipple to replace the rube goldberg...

What did you do to adapt from the bar faucet to the water inlet, looks like 1/2" hose?

pvstoy, Yup, i think i need to get off my fascination with the drain!! quick-connect is the ticket. Thanks all.

I have ordered a foldable stainless faucet from Amaaon and if it works I will post the item. Regarding pressurizing the tank drain, FWC makes it darn near impossible to access the line without removing the tank, and that looks like a big job. (2012 Eagle) Anyone have any ideas?

Thanks Vic. I had no idea that the city water pressurized the faucet. I just fill the tank and go!! Greg

Thanks Russ, I want to pressurize the tank drain and add a little quick connect hose and sprayer. Will look at the bar faucets. Greg

Hi All, Need your advice. I have one thing to fix and one thing to add. The fix: I hate the Whale plunger type faucet. It leaks and does not go up to the off position quickly. I have installed a rebuild kit and it stills works like crap. I want to replace it with something better. What are...

So far so good although I have not been out in hot weather. I bought the camper late last year so I have no interior heat reference. Will post something after a warm weather trip.

Did you find out why the flex panels failed?

BTW I had 6 inches of snow on them two nights ago and the roof is so easy to clean without all of the racking..

They are intended for direct roof-top installation. Lostcreek above is the only feedback yet on the heat issue and he appears to like them.

Thanks for the input, can you post a pic?

I see now.

I am not sure I understand why this is an issue, but the superstrut is pretty darn flexible.

This from Matt at Continous Resources. I am in the backcountry and using a mobile phone for this. BTW you can buy them without mastic. Hi Greg, Global Solar was acquired by the Hanergy Company which is an overseas company. With that being said, the panels are made and tested in the US...

Here is the way I look at it: if the panels hold up (and they are high quality) then I don't care if output drops in the hottest of weather, as long as they perform to spec. From my research, they are a great company that stands by their products. Besides, I installed 220ah and no current...

This is above my understanding, however the roof is pretty darn thin aluminum without a lot of insulation below it. Should dissipate heat quickly. And David, months of camping is not my MO. :)

Actually Vic, wouldn't the true measure be the difference between typical heat degradation of racked panels and these direct mount panels?

Actually one could have a couple of these on each side.

Nope, wasn't me, I am new to FWC's

Prototype $35 single ski rack, can add another. Superstrut. The angle brackets needed to be cut down.