Search results

I see. I have dragged it once on my way to hunt elk. The road is rough and does require 4x4. There were lots of water breaks and holes where I had no issue. Dragging didn't seem to hurt it, other that mark up the powder coating. However, knowing what I know now, I would leave it at home next...

Some friends just got back from Powell and did well. CO has been pretty bad this year.

Awesome! Wish I could find them in CO(in season). One of my trips down the MF Salmon I saw tons of what I assume were Chukar. I did not hunt them then. Love that dog too. He or she is still hunting while getting the pic taken! Such incredible hunters/ friends. Last year I bought the thermal...

The angle of departure is not bad as it drops into the opening of the boat onto the hauler. The bike is set back far enough that the door opens with plenty of room for me to access. I'm 6ft and 200ish so, a bigger person might have an issue. I like the pic on the left that Stan submitted and...

I made a hitch hauler. My Bronco pontoon is pretty small- length wise and I just deflate the tubes so I can get in and out of the Grandby.

I'm not an electrical engineer. The truck- 2003- Ram 2500- Diesel - 2 batteries 875CCA- each Recently, my truck has had a few "slow" starts. This morning it was dead. I had not run it for 13 days. Some things I did this summer: I installed a solar system. 85 watt panel, with a charge...

People do this kind of thing all the time and call it trundling, I beleive. Several years ago they murdered(IMHO) a climber outside of Lander WY doing similar acts.

That would be great to see your set up. I basically have an older version of your set up. Dodge, Grandby... I've been debating what to do for several years and in my mind settled on the Sunseeker although I really like the foxwing. I am not exactly sure how to mount it to the existing awing...

"On Christmas eve my son and I went Chukar hunting". And...was it good?

This looks cool but I think my door on the grandby would interfere. I the their Sunseeker.

Oddly enough, I searched the topic, posted and then found your suggested thread on the front page. I did get it fixed for the time being.

Check the wires behind the front lift board - the wires to the roof go through there. My light and fan stopped working and that was it. They get bent from raising and lowering the roof and can fray. You can reach behind and see - they are duct taped tot the panel. I spliced them back...

I recently purchased a mirror on partsgeek.com. brand new for 75.ish?. Seemed reasonable to me. Some junk dealers charge more for used parts. BD

There is no plug that I know of.

If it is solar that would be awesome as I am in the process of installing it. If someone knows where it's terminated that would help a ton.

2010 Grandby. These wires are located under my thermostat. I checked and they did not have current.

I had no water leaks in my line. The air was drawn through the void, much easier than the water. Water it much more difficult to draw than air. I used pipe tape and re-connected both threaded joints. This happened to me twice. I got this advice from someone else on this board. I can'r...

The one I called for him in 09. 6x6

Nice. Pics? Where do you hunt? Not the exact location of course. I called up this bull for my buddy this year near Boulder. 5x5

Thread hijack Leadsled- Were you out here for elk hunting?

This problem happened to me twice. Both times it was loose connections near the pump. The threaded fittings needed to be re-taped and and tightened down. If there is a leak at all, air is much easier to pull than water and the pump keeps running because there is no pressure to shut off the pump.

The RV technician in town said his experience was that the regulators often leak. I just don't seem to be able to locate one. Any opinions?

I'm having this issue now. 2010 Grandby. Alarms and smell of propane in the propane storage area. I've used gas leak check to test the lines and fittings. Can someone explain how the check the regulator? Can you replace the rubber gasket on the tank valve? Bryan

Perfect. Thanks for the clear and easy to understand advice. Bryan

Can someone give me a breakdown of exactly what I need if I add a panel? Looks like a control unit and maybe some cables? I'd like real advice versus calling a sales guy and getting sold unnecessary parts. Do these come with clear instructions\ schematics? Like, How to connect to the battery...