Search results

I eliminated ( cut and talked over ) the additional 3 wires.. I know there is a drawing of the 4 pin pigtail indicating where each one goes.. I need up running a hot lead to each pin just to make sure which is which.. I am also doing the same exercise with the truck, with a test light..

Finished replacing all Lights with LED, but still would not work. Took apart cable end ( truck to camper) and found only black and red wires connected, all other wires cut back .. Put a meter on truck connections output and turned on lights which correlated to green wire on other end of...

My feelings as well Newbie, I once bought a new refrigerator, the next thing i new I was rebuilding the whole kitchen. I did replace all of the lights, except for the center rear brake light, still no luck . At this point i am looking for a wiring schematic . All 8 lights except for one had 2...

Thanks DaniCa, I pulled the front side passenger light which had the 2 brown wires.. Some comments that these lights are all daisy chained together which makes sense with 2 wires. The soldered wires together , seems like the best option, as the LED wire is substantially smaller..As far as the...

I have read a couple of post regarding upgrading to LED lights..But did not notice this issue.. After removing one light, i noticed that both wires coming out of the side of the camper were brown? , and pretty heavy duty, not sure of the gauge.. So, my assumption is to connect both brown wires...