Search results

The actual location of the eye bolts in the bed of the truck will vary depending on the build of the camper. If the camper is a Grandby Side Dinette, Rollover Couch or, Shell model, the measurements will be 12" and 76" from the front of the bed. If it is a Front Dinette, the porthole doors are...

Depends on what year the camper is. Somewhere around 2013, the Iota converter changed and, the IQ4(smart charge module) was an internal element. As before that, the IQ4 was a plugin module that had to either be purchased as an accessory at the time or, purchased through Iota. There is a Cat5...

I have the same year model Hawk with the fridge at the front. These were called X models and i believe there were less than 20 of this particular model built. Stan Kennedy might know more but, i do know the numbers were low.

Give this company a try. They have made covers for FWC owners over the years. https://www.adcoprod.com/Custom-RV-Covers

The Raven model will not slide all the way forward to the front of the bed due to the wheel wells being in the way. You will have to build a spacer to take up that space so, the bumpers have a solid surface to butt up against when you tighten the turnbuckles. Also, you still will not be able to...

If the wiring was installed by a dealer or, the factory, your running light wire will not come from the battery compartment of the truck or, the camper. You should have a scotch lock connection at the tail light housing to get the feed for the running lights. Also, the running light feed is on a...

When the furnace fails to turn on, remove the outer cover. You will need to remove the chrome cover(exhaust) first, because it covers up a screw from the main cover. Once that is removed, you will see a printed circuit board with a diode to the bottom left of the board. This diode should be...

They are more than likely pre-wiring for flood lights. Most of the green wiring is lighting related.