height

We have a 2018 37' Solititude with a spec height of 13'5". Tow vehicle is a 2018 Ram 3500 with air shocks that I lower when towing. I am a bit concerned about bridge height towing from MN to Maine and back through Canada. I use RV Parky for campsites and routes. This has worked well to-date...

Has anyone run into this issue? Not all the time but probably at least half the time, the Auto Level feature sets my RV level but lifts some or all of the tires off the ground to achieve that. As I watch it process, it seems like it can't ever lower any of the jacks to achieve level, only...

I am getting a Fleet shell for my 2004 Taco TRD. No suspension mods other than air bags. It sits at stock height/level. I know the height will vary a bit but, I am trying to get a ballpark idea on how high the camper door entrance is at the top of the door frame with a similar if not the same...

It can be hard to find photos of various combinations, so I wanted to contribute by posting a profile photo of my stock 2017 F-350 SRW 4x4 (20" wheels) with a bone-stock 2018 Reflection 28BH. You'll note that in it's present configuration it runs a touch over 2" nose high (bottom of bedroom is...

New member here, with '15 Tacoma access cab. I'm in the Pacific NW, so must bring it inside out of the rain. No camper yet. The clearance over the cab top under the door, with everything as it left the dealer, is now 1 foot. I'm wondering if there's any hope of clearing with FWC mounted, with...

All, My wife and I are looking at purchasing a GD Reflection 303RLS. This will be our first Fifth wheel after owning a 1983 kit TT for years and while we have done much research I still have a few questions. I have a height restriction of 12' (the height of the garage door threshold) and I...

First Post so be gentle. We recently purchased a 2015 REFLECTION - 323BHS and am looking forward to picking it up in a few weeks. I have a Curt Q20 5er hitch and it has 3 height settings. I was wondering if anyone knew the Pin Height of the 323BHS when level so I can pre-set the hitch prior...