jacks

I am going to be buying a new alaskan camper off of someone's son who inherited it and does not know a lot about it. Is anyone familiar with this jack system? See photo below. Trying to figure out if I can hand crank them or if I need to bring a battery to operate the jacks. Any help is...

*** SOLD *** 2013 All Terrain Cougar Cab Over Lightweight Truck Camper. SEE PHOTOS Slide-in for 6.5’ or 8' long bed truck. In great condition, non-smokers, original owner, stored in garage. Used about 20 times total. Shell with upgrades. All original ATC build/finishes. Fits Toyota Tundra...

Hi, I am new and this is my first posting. I have been a camper enthusiast for years and I love trucks, campers and camping. I have an F-350 with a Lance. But I recently acquired a 1966 F-100. It really needs a camper and for various reasons and I decided on an Alaskan 8 foot NCO. I posted a...

Can the Rieco Four Corner Mechanical Jacks with C-Ring Clamp be used for a Four Wheel Hawk as opposed to the fixed plate jacks? I have the opportunities to get the c-ring clamps jacks and want to ensure they will work...

Anyone who is contemplating buying a recovery jack but is undecided which one to get might find this article useful. I've used them all in the field, and gave them all a fair shake. Cheers, Jonathan

Hello Campers. I've got a question for Everyone. A couple of months ago I was looking at a Thread that involved a Camper doing a DIY/Homemade Corner Jack Post Mounts, where he had drawing of the Plates that he made and Welded it to his Jacks to convert them to Corner Jacks. Does anyone know who...

I am looking for the most cost effective and safe method for lifting my F150 with a 1400lb pop up slide in truck camper installed. This is in case of a flat tire. I don’t have steel front and rear bumpers so I don’t think a farm jack will work. I want to remove the jack stands from the camper...

I recently bought a rebuilt 1983 Fleet after a couple years of looking for a used FWC, and I'm fired up about it. Among other supplemental purchases to get going, I bought four cable camper jacks to take it on and off my truck...

Does anyone in Santa Barbara have the Fourwheel Camper jacks? If so, would you be willing to let me borrow for an afternoon to adjust my Project M...... Posted originally on Expedition Portal. Ok so here's the reason, I finally made it out to put a proper shakedown on my new project M FWC. I...

Four Excellent Rieco Titan Jacks-Mechanical $600. Like brand new. I used the jacks only 2 times and I am selling them because I have set up a different system to remove my Alaskan camper off and on my truck. I purchased these directly from Rieco...

Got a new project delivered. Not sure what year though? Got it delivered on Saturday and stripped down Sunday! Had a sink and stove, but did not see a furnace. I am thinking to do the following and appreciate any advice for this build: Make it a shell that rest on the truck's bed rails Chop...

Anybody near LA have a set of extension plates I could borrow for an afternoon? I am trying to move my Eagle camper off my tacoma and onto a Tundra. Will need extension plates so I figured maybe someone had some I could borrow for a day... Would be really appreciated. Anybody?

Hi All, Anybody looking for the Electric Conversion kit for their Rieco-Titan Jacks? I have a kit I'm selling on Ebay. This kit is brand new, unused and in the factory packaging. https://www.ebay.com/…/Rieco-Titan-Camper-Jac…/392345881667… I used to take my camper on and off a lot. By yourself...

Four Excellent Rieco Titan Jacks-Mechanical $600. Like brand new. I used the jacks only 2 times and I am selling them because I have set up a different system to remove my Alaskan camper off and on my truck. Picture below is jacks on the camper before the newer system rebuild. I purchased...

I have a 10ft Alaskan cabover slide in on a F350 dually with standard manual rieco titan jacks and am considering upgrading to the www.stablelift.com system. Does anyone out there have experience with stable lift jacks ? My biggest concern the the expansion blocks on the rieco total jacks used...

I have a set of new, unused Reico Titan camper jack mounting plates/hardware available. It is the same as this set, but I will also include Zinc mounting bolts and washers, and not the round "pipe clamps"...

Hi. Totally new to slide in campers (coming from a '72 VW Westy oh boy). I could use a little advice. I mounted a 1986 Six-Pac camper onto 12x8x12 cement blocks 3 tall so a couple feet in the air (used to sit on a trailer that's since been taken away). Works well in general, but as I've jacked...

Hello Everyone, I am new to pop up campers, and I have just finished retrofitting my newly acquired 2005 FWC Eagle onto my 2014 F-150 Supercrew. To fit above the bedrails I constructed a 6" tall spacer frame of 2x6's and 3/4" plywood. In order to clear the truck bed and 6" riser, I need to...

Have 2 of the older mechanical jacks that I guess can't be purchased anymore for safety reasons. I've never had a problem with them. Easy to get camper off without installing jacks on each corner. Also have a dolly on a metal frame that is the size of a sheet of plywood. Make me an offer, or...

*SOLD* to a nice fellow from Nelson, BC. Thanks for looking. It is with heavy hearts that we list our 2006 Eagle shell. We love it, but we are needing a bigger truck. This camper was imported to Victoria, British Columbia from FWC in Woodland. We have used it for approx. 6 weeks per year since...

Anyone put regular camper jacks on an alaskan? The old school kind on all four corners? I'm tired of the instability of the tripod type.

I have a set of four standard Rieco Titan tripod jacks for sale. comes with jacks, 2 handles , 4 bases but no brackets. one is a little stiff up and down but still works. I also have a set of 2 extended brackets I could sell with them or seperatly. Shoot me an offer I'm in the Seattle area