Hello, just signed off on our build sheet for our 5.0 and I asked for them to supply but not install the Springfield pedestal and table. We plan on bringing along a smaller table or our own and installing the pedestal where it works better for us.
So I've asked our sales person some questions...
While camping with my buddy in Anza Borrego, he said “we needed some shelves to keep stuff off the ground”. Back @ home, I came up with these 7/8” plywood pieces that fit between my truck bed and Hawk camper. The size was chosen such that they fit into the gap of my Aluminess rear bumper...
Hi All, nearing the end of my build and the table options are keeping me awake! I have searched the Forum to find great information but nothing exact so I thought I would ask the community.
5.0TA build - I thought of purchasing the Marine Pedestal due to it's sturdiness and ease of collapsing...
Here are the plans and instructions for our permanent mount drop leaf table for our Escape 19 The Tennessee Rambler. It looks like the drawings uploaded but my word file with instructions and pictures is too big. Back to the drawing board.
We opted for Escape not to mount our dinette table because we wanted something smaller and less in the way. We wanted to use our dinette mostly as a lounge without the table. We also have no need to use it for a bed. We came up with a design for a permanent mount drop leaf table that serves as a...
HI Folks. Would someone with a 2670mk be able to tell me the dimensions of the dinette table?
We are ordering a 2400bh and think we might like a little longer table. The table in the 2670mk looks like it might be about the right size.
thank you.
We’ve had the 17A since July and taken it out on five wonderful trips around Oregon. Including the fiberglass gathering last weekend! Two very small issues have shaken down as we’ve been using it and we wondered if anyone has experience or advice with either:
1. Slight, quiet but annoying...
I am making a new custom dinette table top and I cannot identify the track material used. I would re-use the original but it is liquid nailed in place. Also, I want to keep the original top in the remote chance I will sell camper one day. My internet search came up empty. I even asked a...
Own a 2013 19ERD Visa (aka,Vintage Cruiser as GS changed the model name from Visa to Vintage Cruiser a few years ago). Anyways, the 2013 model has a single leg on the inboard end of the dinette table, so that is a bit wobbly. The newer Vintage Cruisers seem appears from photos to have a more...
After three seasons we decided to add an island, modify from one step to two steps with shoe storage and modify the table feet.
ADDED ISLAND
I added the island for additional work surface. It is also nice to have when putting things into and out of the refrigerator.
The base cabinet is 30”...
Just got our trailer delivered to us this week. We have the springfield pedestal with the sliding tabletop. It is full size table, as we have standard dinette, not u-shape. Tabletop is pretty wobbly. When sitting at it, if you lay arms on table, it tips a tad. There is that screw on bottom...
We're considering removing the booth in our 2670 to replace with a free standing table and chairs. This is an option if you order direct, but since we bought at a dealer with a steep discount we decided to just get the booth and remove it ourselves if we wanted. It's better than paying an...
I am documenting my individual build to share ideas. For all the posts that helped give me real life info, shared experiences & thoughtful innovation. I could better imagine my current needs. Initially I will show my roof solar panels. Some pics will post, others not. Materials .....
(Renogy)...
My daughter (8 years old) leaned on the edge of our dinette table with a bit too much of her weight and the applied torque ripped the screws out of the wood and splintered the floor a bit under one of the circular table footings. I have a couple of options to fix it:
(1) I think the most...
When hubby and I were touring the showroom we decided we liked the (Hawk) side dinette more than the front dinette since it was nice to look out the side window while seated. But it seems most, if not all, of the dealer inventory builds we've seen online have the front dinette. I'm wondering...
Hi all,
Wife and I finally decided to upgrade trailers. We've been very comfy in our 2004 Fleetwood Terry 250Rk for years, but even with good maintenance things break down... It was time we treated our hard working selves to some new amenities for some future glamping, so we started looking...
We have the u shaped dinette in a 21. The table is getting very wobbly. The screws are all still tight. The legs have just compressed too much on the ends over time. I tried banging them back out without much luck. Does anyone know of a solution?
My wife and I work a lot at the table so if...
I am trying to remove the dinette table in our 2014 Hallmark. I believe it should just lift up (the dinette can be made into a bed) but won't budge. The pole seems fixed in place and will not move up, down or rotate. I tried tapping on the pole with a soft hammer but that didn't loosen it. Any tips?
I thought I would share my new table for my Ocelot with roll-over couch. I mounted the table on the cabinet in front of the water tank using oak mounts that allow the sliding cabinet door to slide behind them. The table sits on folding shelf brackets. I added a couple of braces to the inside...
Hey all, just completed a mod to my Hawk. I took out the stock single leg table which always seemed to be in the way and worst of all, not available when the dinette was in rollover bed mode.
In short, I used black iron piping to create a swivel frame and mounted that to the FWC table. I would...
Does anyone have a Dicor pedestal table without a raised floor? And if you do have the Dicor pedestal without a raised floor what is the table height?
Thanks!