Bungee nets for covering cabinets?

Barko1

Senior Member
Joined
Aug 20, 2008
Messages
1,635
Location
Southern Appalachians
I have ripped out, literally, the little sliding wood cabinet doors from inside my Grandby. I have seen other RV's with nice little bungee nets that cover the openings keeping all the crap inside but can't find a source. Right now I am using bungees that were designed as motorcycle cargo nets which may work. Getting rid of the doors has actually allowed me to see what is in the cabinets :eek: I also ripped out the smaller sliders that are below the bigger cabinet and changed them to hinged from the bottom, now I can see and access what is in there! Oh and since I ripped out the fridge I installed shelves on rollers, still a work in progress but I think wire baskets on the shelves will work as good as drawers and I can see what I have in there without opening, All a work in progress, I engineer as I go :(
944875165_GQN5s-M.jpg

944875574_SdaZD-M.jpg
 
They have some here-30" x 12", bottom of the page.

http://www.mcmaster.com/#cargo-nets/=837vmy



Thanks D Rancher :D Ordered some up. I'll be ready for the road.
 
They have some here-30" x 12", bottom of the page.

http://www.mcmaster.com/#cargo-nets/=837vmy



Delivered and installed today. I hope to test the new configuration on a trip at the end of the week but this net covers the main sliding door area very well. It comes with four screw or velcro knobs for attaching but I just used some cabinet door knobs that I mounted on the cabinets. Thanks for the good lead.
 
Back
Top Bottom