[SIZE=11pt]2016 FWC Fleet Side Dinette Shell, Silver Spur Exterior[/SIZE]
For images, please see my CL ad:
https://saltlakecity.craigslist.org/rvs/6204848755.html
[SIZE=11pt]I lived in this for 5 months full time, almost completely on National Forest land. Since I lived on public land, and traveled the narrow, bumpy dirt roads, it does show signs of offroad use, but the frame is in perfect condition. Just some scuffs and one dent near the large passenger side window where a branch refused to move out of the way. [/SIZE]
[SIZE=11pt]It's a shell model but I had the side dinette, fantastic fan and propane cabinet added at the factory. It'll come with 1 Renogy 100W solar panel with Morningstar SunSaver MPPT solar controller (I can mount the panel to the roof with aluminum angle if you'd like), Yakima tracks only, AT Overland fuel can carrier (mounts to camper jack mount), Propex HS2000 forced air propane furnace, ARB 50qt 12v fridge, 2 6v 220amp hour batteries wired in series for 12volts, Blue Sea fuse block, Blue Sea 12v usb and car plug, Blue Sea Master on/off switch, Blue Sea SI-ACR battery separator, (1) 13.3lb propane tank, 40lb AND custom valved 55lb exterior lift struts (4 each), camper jacks, Tacoma bed mounting bars, FWC Thermal Pack, CO detector. I'll also include the aluminum bar and FrontRunner Outfitters mounts for an ARB/Tepui awning, but the awning itself is not included. [/SIZE]
[SIZE=11pt]The furnace is installed and works well, but I'll be honest in saying that I could have done a cleaner job with the install, as well as the wiring for all accessories, but the frigid winter months in northern Utah made working on the camper difficult. Everything is, however, in safe, working order. [/SIZE]
[SIZE=11pt]All FWC documentation is included. [/SIZE]
[SIZE=11pt]This will be an excellent project for a DIYer looking to do a custom interior build, but it's also in turn-key condition for others looking for a lightweight FWC that's ready to get out there. [/SIZE]
[SIZE=11pt]I'm selling because it's honestly too big for me. I'll be moving to a regular truck cap camper build once my FWC is gone. [/SIZE]
[SIZE=11pt]Price: $13,000[/SIZE]
[SIZE=11pt]Located in Heber City, Utah.[/SIZE]
[SIZE=11pt]Please send [/SIZE][SIZE=14.6667px]inquiries[/SIZE][SIZE=11pt] to jccatalano1@gmail.com, or call 716 . 866 . 9987[/SIZE]
[SIZE=11pt]Thanks for looking![/SIZE]
[SIZE=11pt]Jeff[/SIZE]
For images, please see my CL ad:
https://saltlakecity.craigslist.org/rvs/6204848755.html
[SIZE=11pt]I lived in this for 5 months full time, almost completely on National Forest land. Since I lived on public land, and traveled the narrow, bumpy dirt roads, it does show signs of offroad use, but the frame is in perfect condition. Just some scuffs and one dent near the large passenger side window where a branch refused to move out of the way. [/SIZE]
[SIZE=11pt]It's a shell model but I had the side dinette, fantastic fan and propane cabinet added at the factory. It'll come with 1 Renogy 100W solar panel with Morningstar SunSaver MPPT solar controller (I can mount the panel to the roof with aluminum angle if you'd like), Yakima tracks only, AT Overland fuel can carrier (mounts to camper jack mount), Propex HS2000 forced air propane furnace, ARB 50qt 12v fridge, 2 6v 220amp hour batteries wired in series for 12volts, Blue Sea fuse block, Blue Sea 12v usb and car plug, Blue Sea Master on/off switch, Blue Sea SI-ACR battery separator, (1) 13.3lb propane tank, 40lb AND custom valved 55lb exterior lift struts (4 each), camper jacks, Tacoma bed mounting bars, FWC Thermal Pack, CO detector. I'll also include the aluminum bar and FrontRunner Outfitters mounts for an ARB/Tepui awning, but the awning itself is not included. [/SIZE]
[SIZE=11pt]The furnace is installed and works well, but I'll be honest in saying that I could have done a cleaner job with the install, as well as the wiring for all accessories, but the frigid winter months in northern Utah made working on the camper difficult. Everything is, however, in safe, working order. [/SIZE]
[SIZE=11pt]All FWC documentation is included. [/SIZE]
[SIZE=11pt]This will be an excellent project for a DIYer looking to do a custom interior build, but it's also in turn-key condition for others looking for a lightweight FWC that's ready to get out there. [/SIZE]
[SIZE=11pt]I'm selling because it's honestly too big for me. I'll be moving to a regular truck cap camper build once my FWC is gone. [/SIZE]
[SIZE=11pt]Price: $13,000[/SIZE]
[SIZE=11pt]Located in Heber City, Utah.[/SIZE]
[SIZE=11pt]Please send [/SIZE][SIZE=14.6667px]inquiries[/SIZE][SIZE=11pt] to jccatalano1@gmail.com, or call 716 . 866 . 9987[/SIZE]
[SIZE=11pt]Thanks for looking![/SIZE]
[SIZE=11pt]Jeff[/SIZE]
