Search results

I have a similar FWC and needed to space it up to clear the bedsides. I would like all who need to do this to consider just going to your local hardware store and buy the blue or green (your favorite color) of ridged insulation in the thickness needed (or combine to correct thickness). Don't...

Look for a tailgate assist kit, as a lot of brand trucks have them. If that doesn't work for you, maybe ad a short dog leash type pull strap on some of the existing fasteners.

You can't effectively secure loads to sheet metal, and when you continue to tighten the binders, you just bend the metal more. You need to attach to the frame like on Stan's recommendation.

A properly ordered RAM will have factory air ride suspension that will adjust to any legal (and beyond) load and keep the truck level and safe without aftermarket junk scabbed in. It sounds like a lot of people add air bags to F150, it would be the same for a RAM 1500 if you don't like the...

Yes, it is called an elastic band.

I find if it is hot, the roof fan is good for white noise or you can buy a battery op white noise generator so it sounds like rain or static or whatever you want.

Where is it located?

I would check with FWC before you remove it, to me it looks like part of the support against fore aft movement.

It would be nice to let us know what they advised.

Are there any post that cover this topic so the old school campers can understand better on what advantages/disadvantages are involved with changing from lead-acid to ? My battery is getting kind of weak...

6awg is good for 50 amps up to 15' in length. I believe when you list your batteries ah, that is amp hour, which is a general spec to compare to other batteries and that your battery can put out 100 amps for an hour (but in reality it may not be able to actually do that). What in your camper...

Last resort, can you run a smaller line through inside of the old one to bridge the concealed area?

What would be the negative of just direct bolting of the ARB to the side of the camper? If your particular camper had to have the latch moved, you could fill the holes with caulk or silicon and it would be covered by the awning.

Please send me the pics

Can you post pics of inside? A lot of us would be interested in seeing the conversion.

If the specs you listed state 15 amp fuse max, wouldn't at 10 amp be more realistic? And 30 or 40 amp is out of the ballpark

You have 4 choices,1.make camper narrower (sand plane or reconstruct),2. cut out the part of the bed that is too narrow then have reinforced and repainted and make sure wheel wells are not going to be a problem, 3.buy a flatbed for the truck (you could sell your bed and recoup some of the cost...

What do you expect for temperature range? If hot, you may want more room.

I don't believe the floor is designed to support the weight of people, it needs to be resting on another structure.

Just remember the clearances will change during dynamic conditions, especially off road.

Get a test light and connect it to the wires you state are by the faucet, then turn the panel switch on and off to see if you get power at those wires. I have an Eagle, it has the electric pump and also a hand pump at the faucet. If you don't put the hand pump lever all the way down, the...

Love the honesty!

You might have a problem with your stove like the regulator is low? My stove works fine

And if you did it, how long ago and how has it held up? Any cracks forming? Do you go off-road? I think the best is to use the receiver hitch accessories since they mount to the frame of the truck. I was even going to install one on the front.

If your house battery is not dead, the truck will bring the voltage up to 14.2 +- at idle if you have it wired correctly. Just put a volt meter on the battery terminals and read it.