I have a pretty light 3 rail dirtbike trailer. I put a sheet of plywood on the trailer under the rails. I can remove the three rails and have a flatbed trailer that is narrow enough to fit between the camper jacks. I have used this setup to load my FWC for many years. The trailer is only rated for about 1500 lbs, so I don't travel anywhere with the camper on the trailer. However, when I store the camper for long periods, I put it on the moto trailer and the camper is completely stable (I do put a large block under the rear of the trailer to keep it from tilting up). Since I don't have much flat area on my property to load the camper, I use my quad or my SUV to pull the trailer up to a level area on my small street to load and unload the camper. Here is a pic of the FWC, the trailer and the quad.