More organizers....
Here is an additional organizer near the bed on passenger side:
Here is a communications organizer (radios, Leatherman MUT, knife, etc.) made real cheap out of a piece of wood trim, a hinge, and a knob:
I have a Fiama awning on my Hawk and purchased the enclosed room that attaches to that awning directly from Fiama.
http://www.fiammausa.com/products/awnings.asp?Fam=P04
It's pricey but is fine quality.
Unfortunately the Case Logic "Stud Wall Organizer" and "8 Pocket Organizer" are no longer being made.
I found a few on ebay and bought them for future use.....maybe there are still some available there.
I have two of the same battery that Ski3pin has....they are great.
randygirl, why not hook up your charging system again? You will need it during times of stormy weather (no sunshine).
I use these from Cabelas for packing frozen meat when one of my hunts turns out lucky. They work great!
Four of them pack nicely into a duffle bag and take up very little space until needed...
Check behind your front panel for broken wires. Common problem and may only show up some times.
http://www.wanderthewest.com/forum/topic/6660-wire-shorts-at-the-front-lift-panel/page-2?hl=+wire
I had several wires partially broken....and at times the exact behavior that you describe was...
It's good to see this thread is still alive!
I've had my Lagun mount a couple of years now and it is still as perfect as the first day I installed it.
This is still my favorite mod out of all the ones I've done.
It was the Boyo VTC461R Rear-view System. I don't know if they still make that model. It was installed in my Tundra for a couple of years and has been in the Ford now for four years. Still works great.....no complaints.
The camera that came with this system is on the back of the...
I forgot to mention that the video screen mounted over my rear view mirror has two video inputs.
I also mounted a camera above the license plate of my trailer. I switch the input to that camera when pulling the trailer so I always have rear view then too.
As a side note, I hated losing my standard rear view mirror when the camper was mounted......trying to get a good rear view through the tiny opening in the camper door window was a bummer. Besides, I prefer to leave my rear window curtains closed to prying eyes.
So, I mounted a second camera...
I have a 2010 F250. I removed the camera from the tailgate.....drilled one small hole in the center of the metal panel below the camper.....and remounted it there. Works just like it always did.
The camera has been there for 4 years now with no issues. I also enjoy the dotted lines that the...
The plastic pieces are Yakima brand bar locks, they come in a package of 4 with keys. They are the ones used for mounting a Yakima basket to the bars.
http://www.yakima.com/shop/racksystems/security/accessory-lock-housing
http://www.yakima.com/shop/racksystems/accessories/universal-snar
The...
Does anyone have a list of compressor fridge model #'s/names that are direct replacement for the Norcold 3-way that is mounted in an Eagle? I couldn't find anything concrete. I will start looking for sales/deals... but I don't know exactly what to look for. :(
I replaced my Norcold 3-way with...
Here is a "State of Charge" chart.
Everyone's usage and habits are different. Just monitor your battery during your normal camping conditions and see if your battery is being drained deeper than you would like. If need be you can add another battery.
You should use identical batteries and...
The nice thing about mounting to the Yakima racks is that it allows plenty of flexing so when you are twisting down those jeep trails there is not enough torque to rip the screws out of the roof like in Acunat's picture.
The solar panel mounted to the cross bars has worked out great!
I have literally pounded this set up and it has proven itself sturdy. I was initially afraid to mount the panel to the roof for exactly the problem you describe.
I had initially mounted the panel to the cross bars as a temporary...