Search results

Thanks, Brian. I eventually realized that the cover was being held in place by butyl putty. I raised the temperature in the camper to 90 degrees for a few hours and was then able to easily prise off the cover. Thanks for the comment...

Almost new Torklift A7202 Stable Loads for Chevrolet / GMC trucks. I only put a few hundred miles on these. Currently selling for $350. Asking $150 + shipping.

You can easily use your Torklift Fastguns with an appropriate piece of chain and a quick link through the jack mounting holes on the jack bracket. The attached picture illustrates. Note: Use an appropriate threaded quick link, not a snap link as pictured (the camper was being moved around the...

I need to disassemble the pump handle assembly on my toilet in order to inspect the LED fill light. However, I can't find any instructions, and regardless of how hard I pry, none of the applicable parts want to pop off (the top to the flush handle or the flush assembly trim piece attached to...

I've mounted my FWC with Torklift Fastguns (I normally use them for a much larger truck camper), but I prefer the sleek lines and narrower profile of the bed-mounted tie-downs. I installed forged eye bolts and forged clevis-end and hook-end turnbuckles with jam nuts, which completely eliminate...

Typical truck bed loads are compressive whereas the turnbuckle-to-the-bed solution used by FWC creates forces that try to lift the bed from its support rails, which can potentially lead to the failure you demonstrate here. The way FWC mounts the campers inevitably causes you to constantly chase...

I've used the LuxPRO PSD010BF in several campers. I like them better than the Honeywell (backlighting, buttons, and accuracy), and they've been very reliable. Their minimum temperature setting is 40 deg F. https://www.amazon.com/gp/product/B005FYNCJW

A half ton will carry a Hawk or Grandby just fine (although Ford and Chevrolet generally have much higher payload capacities than Toyota), but a 3/4 or 1 ton will carry the camper like it isn't even there. The difference in brakes alone really must be experienced to be understood. If carrying...

How do you like the Torklift turnbuckles?

It would be appreciated if you'd respect the time of forum readers and post a price and some pictures. Please DO NOT use posts like this as a means of researching market pricing conditions and gauging interest in future planned sales.