Search results

I did not want to cut bump stops down so it does stick out a little but figured they are there for a reason. Thanks again for all the help on this site.

Thanks guys, got it done today. Ended up using DuPont 2” high load foam board rated at 60 psi. Lightweight at 12 lbs, no water absorption, R-10 insulation value and may give just a little cushion off road. Gave me 1 3/8” clearance above bed rails, time will tell if it compresses and settles at...

Thanks guys, sounds like it will be similar to most others, I’ll trim down bump stops if need be. Bed depth is 22 3/4”, Hawk is 22 3/4” so I’m planning to do stall mat or build up with wood like FWC does

No I believe it was made for a Dodge. My plan is to follow others recommendation to use a stall mat to elevate enough to clear my bed rails.

I just got a new to me 2018 Hawk to put in my 2017 Tundra double cab with the 6.5 ft bed. I got the eyebolts and electrical done and have yet to put in my truck. I noticed the Hawk length is 84” including approx 3” for the bump stops and backing on the front of the camper. My bed length measures...

Thanks for the heads up on the horse stall mat, I’ll check it out

This is interesting. I just bought a 2018 Hawk for my 2017 Tundra. It’s sitting on sawhorses next to my house until I get eyebolts put in. Your post made me go measure. Camper is 48” wide at base, I measured 49” between wheel wells in my Tundra. I also need to build base up a little, the 2018...