Search results

i ordere the 1/2" Hex Bar from a Industrial Supply called McMaster-Carr. I ordered a 3' section for $10 and cut it in half .

oh, i totally forgot to attache the rest instructions. sorry

here's a copy of the Lift Parts Drawings

Lift System is all worked out. Now I have a Roof Issue. Completely Rotten and Decayed. Previous Owner said "it didn't leak a drop" Famous last words. ha ha Took the Roof off and found waterlogged wood/soaked insulation foam and more problems. On the hunt for a Roof Solution. Possible Rebuilding...

Just wondering if there's any other Viking Pop Up Camper Owners on here. Just curious to see other peoples Viking Camper Setups. Thanks. John

Hello Campers. I've got a question for Everyone. A couple of months ago I was looking at a Thread that involved a Camper doing a DIY/Homemade Corner Jack Post Mounts, where he had drawing of the Plates that he made and Welded it to his Jacks to convert them to Corner Jacks. Does anyone know who...

looking for ideas for my Switch Rod Fly Rod(11'6")

camper is purchased and home now. started a clean out/tear down. the base seems to be top notch , just the top canvas/lifting issues. taking measurements on the roof for replacement lifting panels or EMT tubing. decisions decisions,

went back and looked at the camper after some Wander Searching. so far it definitely needs a lifting panel system and potentially Vinyl repairs/replacement. i'll know more when i pick it up this week, get it home and start cleaning it out. Ouch. These campers are pretty bomb proof and...

Supposedly the new material of lifting panels are far more expensive now then even a couple of years ago. With shipping, i'm looking at $2K for parts then assemble/Install. Apparently there' also issues with an new parts going into a older camper. The sellers lowered the price and I'll see what...

sorry for the delay, i just sent you an email. thanks for everything.

Apparently the Owners were told by Four Wheel that in Total it would be close to $1500 for the Parts needed. I don't know what all they were told the needed. I'm just going by what the Sellers was telling me.

Yes. Everything is gone. Nothing holding the Top/Canvas to the base. if you hand lift it , it can slide up and off. Apparently all of the new ones are some form of polymer plastic but the wood ones. The rest of the camper is in Primo shape, just no lifting mechanism. Are the front the same as...

It's a long shot but her goes. I've found a used Older Four Wheel Camper Hawk here locally in Ohio that has the camper and roof but no lifting hinges/push board. The price is so low ($1000) and it's probably why it hasn't sold yet. The roof is secure with the latches and canvas material is...

After figuring out my Lifting Issues(not wanting to raise/handle wanting to come out while cranking and top slamming down) with my Truck Camper, I placed an order for new Heco Lifting Parts(Rack Gears,Gear Housing,Vinyl Rails,Slides and Handle). I was getting ready for the new parts by...

Ruck_and_Roll, Thanks for the response. Did you use a single layer of it or double it up? Isn't it supposed to be fire Resistance/Proof? what about the top? Thanks again for the Info.

Thanks for the Link. i've gotten the Part List PDF but still no info on how to adjust the Lift System or replacing parts. The more I look at others Truck Camper, the more I want to swap out the roof/lift system to an easy one. Ha Ha

LuckyDan Thanks for the response. I don't know what the PDF was but it isn't available, my luck. ha ha I'll try calling Hallmark when they're open. Looks like the Heco Info is not a Composting Site, oh well Thanks again.

Hello everyone. I recently purchase a used Truck Camper and I have been going through it to make it 100% and having some issues with raising and lowering the Pop Top. My Truck Camper(Viking Spirit ) has the "Heco" Lifting System with the Crank Handle that you Crank from the center rail system...

Hello everyone. I recently purchase a used Truck Camper and I have been going through it to make it 100%. The Previous Owner said the Norcold 323 3-Way Fridge had never worked and now it does on all 3 Power Sources(12VDC,120VAC and Propane. It ended up being some Wiring Issues/Bad Fuse. I pulled...

Thanks everyone for your inputs. so I solved some of the issues i found. I was able to fix the Issue with the Fridge, it now works on all 3 ways( 12VDC, 120VAC and Propane). Wiring issues of course. ha ha still on the hunt for a replacement for the Propane Door. I contacted a local RV Store...

thank you everyone for your inputs. the more i dig into this camper the more i see. ha ha The Window is my main concern right as the recent rain has been more frequent. . the previous owner had slab of thin wood, silicone and some screws holding together but it still leaked. the sizing is a bit...

thank you for the reply. I'll look into ordering some parts. any online companies/stores suggestions besides amazon or ebay for camper parts? The only "Camper Store" I've ever been to is a Camping World. ha ha