Search results

To turn on, you press the button and rotate from off up to your desired temp. So you pass thru the lower temps. I think I saw 42 or so. But usually dial right past them. I will have to check next time I visit the camper on our storage barn.

Yes, I thought about a cover over the top edge of the frame. But something that sits flush but allows air to pass wd be more "finished". From what I can tell... It isn't an issue with space for the furnace.

You can see in pics that they installed with interior face plate with a 1" standoff. They said for air return. I'm not a furnace expert but seems like you cd replace with a flush faceplate that was either perforated or grilled to allow for air exchange? I'm not messing with it now, too new...

Condensation is pretty similar to the prior furnace from what I can tell so far. Had a and amt condensation the coolest morning. Has never been a big issue for us. Don't camp in real winter. Crack a vent and a window. Run roof fan after getting up.

And here are the exterior

Here are interior pics

It was $2k for install. They used a different cover for the outside. Black plastic composite that looks like it came with the camper. The inside old furnace opening was covered with a plate with a much smaller vent opening. The new inside plate is attached by 1" bumpers to offset from wall. This...

We have a 2020 hawk rollover with the standard furnace. Love the camper but was never completely happy with the furnace. We occasionally camp in shoulder seasons where night temps might just dip below freezing. Never in the snow. Furnace wd come on hard and loud and roast us. Then shut off and...

My original post was from a year ago. We ended up getting the parts from FWC. We have had to do a few repairs and they have always offered amazing service and support. We just send them pics so they know what piece we need. As to removal.... Just some small hands and wrenches. They are just...

Yes, I got the idea from the prior post and I have plans to stabilize. Just looking for the hinge right now. Prior post stated they drilled out the "plastic" pin. Now they are metal which makes removal more difficult. Hence my desire to play with a spare instead of screwing up the only one I...

Any ideas where to get a replacement hinge for front push bar? I want to attempt drilling out pin and using a removable pin so I can remove bar for sleeping. Just don't want to destruction and not have backup! I can email fwc, just know they are busy so thought wd check here first.

ISO: used/damaged ARB screen room for their 2500x2500awning. We want just a simple screen room without canvas/floor/ceiling but cannot find anything. So plan on cutting up the screen room to see how it works. Obviously not interested in spending $300 for something I plan on destroying for...

Pics attached. Hope this helps. Hard to get good pic. Will need to disconnect again to get better views.

Hmmm...pic didn't attach. Will try the link. https://atoverland.com/products/fast-disconnect-external-shower?_pos=1&_sid=b515abfb8&_ss=r

2020 Hawk had pressure issues at exterior shower. Also had air entering water pump. Removed lines from brass fitting going to quick connect. Looks like one of the plastic valves in the "y" shaped fitting that attaches to hot water line is broken. Likely allowing backflow of air. Can I purchase...

We have the flush sink with glass cover. Would like to attach "something" to inside of glass. To store small dish soap container and sponge with top down....and hold out of way with glass top up. Either suction cup or stick on magnet. Any ideas?

We are looking for an exterior grab handle. Let me know if not reusing elsewhere

Looking for a rack to store table under rack (or need of camper) tbra016. Anyone have one to sell?

Thx much for the info

Has anyone installed the stainless camp table over the cab area with their z brackets? We have the needed clearance. Wondering about noise and rattle? See they have a pro table with "noise reduction brackets" and nylon edging but brackets are not currently available. Wondering if any less noisy...

Thx much. Will play with this. Just figured out how to do street routes on Gaia as well. So will play.

Caltopo looks great for backcountry info. I do not see a way to create driving routes with stops, etc. Or am I missing something?

I have searched for this on the site but mostly found posts from 4-5yrs ago. Hoping folks have some more recs now. We will modify use Delorme style paper maps and Gaia or Google on the go. But I often read about cool ideas for a trip to X location. Wd like to gather these options to store. Then...

Can anyone tell me what table comes with the newer model hawk rollover? Doesn’t look like they are doing the pedestal “in the floor” version? We have hawk on order but didn’t clarify this. Thinking about converting to lagun style if not already similar.

Thx astropuppy. Wow....even the 135s are in short supply! Thanks for the info.....I went ahead and ordered one. Will use in our enclosed trailer (hauling dirt bikes and camping in poor weather) until we get our hawk. We must wait til May for the camper. So plenty of time to plan. Hoping to put...