Search results

I have a 20 Silverado Z71 and would like someday to get a 2" lift. During my research I have seen these mentioned many times and they seem to be a popular option. https://dirtking.com/collections/20-silverado/products/ball-joint-upper-control-arms-dk-636901 As far as the LCAs are concerned, I...

Question about the Hellwigs, I have a Silverado and when I replace the shocks do I get a longer shock? In other words do the Hellwigs rise the rear any? I was looking at SS A5 and was told they will raise the rear about 1- 1 1/4 inches. Anybody know? Thanks, Gary

I agree with all the above. Check out this site: http://www.cheaprvliving.com/forums/index.php Very interesting and unique. Also don't forget google...

The approved water hose for drinking water does not have anything to do with the water pressure. It has to do with the type of PVC that is used in its construction. Non-potable water hoses will leach bad chemicals into the water as it is used. So drinking from one of those hoses once in a while...

Instead of an isolator/solenoid, how about a charger? Is only on when charging, when charging is off the unit goes into a very high resistance state with no bleed-over. In other words, there is no electrical connection from battery to battery. Something like this...

Very cool, should be simple to build and try. The link to eplaya is even cooler. A whole forum that big dedicated to Burning Man! I have not seen that before and am looking forward to spending some time checking it out. I would love to go to Burning Man someday.

A quick LED primer. There are two cost levels, and many sub-categories. You buy quality LEDs or the cheap china ones. I own way more cheap china LEDs because of cost compared to the higher quality LEDs. The main advantage of the cheap china LEDs is you can get quite a few of them (cheaply) and...

If the LEDs are failing, it is not your fault or your camper's fault. LED lighting for the auto industry should be able to handle a wide range of voltages that are present in that environment. At least 9VDC to 15VDC without any problems. You are getting defective or very low quality LED lights...