Hello all, I have a 2022 Total Composites 6.5 FT flatbed with DA (departure angle). 6.5’ floor but 8’ overall length of body without cabover up forsale. This camper was built by Overland Adventure Truck out of Olympia, Washington. I am the first and only owner.
I’m located in Southern California. City of Corona.
- Cerbo GX
- Lynx shunt 1000
- Lynx distributor 1000
- MultiPlus Compact 12V/2000VA/80A not installed yet.
- GX Touch 50 interface.
- Interface MK3-USB programmer adapter
I have spent hundreds of hours designing, ordering, building, fabricating, and making this a dream flatbed camper set up with a layout that I believe to be the best use of space. This project is 80-90% complete but I no longer have the time or energy to designate towards completion. And with another small kid, it no longer fits the bill for the family. This setup will save you thousands and thousands of dollars and time from trying to accomplish a build out from scratch. Trust me, I’ve done it!! You can use this camper today for a weekend, a week, or full time.
I have hundreds of photos of the build process for anyone interested.
I’d be willing to sell with a 2020 Ford Gas F-250 Superduty with custom aluminum flatbed for the right price. Truck has less than 30k miles. Full size spare tire, airbags, and front hitch receiver to name a few upgrades.
$35,000 for the camper. I would be willing to discuss an all in package with anyone interested.
I’m located in Southern California. City of Corona.
- Manufactures certificate of origin. This document would be necessary if your state requires a title for truck campers.
- 2” thick, fully composite camper construction. No wood to rot and HIGHLY insulated. I’ve had this down in 20* weather and have yet to need a heater with 2 adults and a kid on board.
- Custom black powder coated aluminum cab over support brackets for a piece of mind.
- Torklift lockable FastGun spring loaded turnbuckles to tie camper down to truck bed.
- Full set of Rieco Titan camer jacks. Manual jacks but comes with drill attachment.
- Accent RV, Inc. 18 year roof coating with transferable warranty. This added additional insulating properties and a 100% covered and sealed roof membrane. Over $2k money well spent. Never worry about the roof seal again.
- 3 large Artic Tern windows around the circumference of the rear dinette. I have (2) more Artic Tern windows. One huge one for kitchen area and one small one for cab over bed area yet to be installed. These windows are the highest quality you can buy, Dual-pane European acrylic, UV Resistant, Genuine G.E. Lucite Perspex with less than 2% clarity loss over 10 years in full sun, Maximum Ventilation with full-size window opening. All windows have pull down bug screens and pull up black out shades.
- Artic Tern Wildlands entry door with lockable black powder coated stainless steel screen door. I have also added the thermal pack to this door to block window and add insulation.
- All cargo doors are Artic Tern and everything is keyed the same including the lockable water filler. I have (2) more large Artic Tern cargo doors yet to be installed.
- Dometic CRX 110E 3.8 cu. ft. Compressor Refrigerator. 12volt or 110volt.
- 40 gallon fresh water tank mounted in the very front centered on the floor for even weight distribution.
- Shut flow water pump with accumulator tank.
- Trelino origin S composting toilet.
- All Victron Energy electronics. No cheaping out. I can remove all the electronics if that is decided upon with the buyer.
- Cerbo GX
- Lynx shunt 1000
- Lynx distributor 1000
- MultiPlus Compact 12V/2000VA/80A not installed yet.
- GX Touch 50 interface.
- Interface MK3-USB programmer adapter
- (2) Battle Born batteries. 100Ah 12v LiFePO4
- (2) 200 Watt Renogy solar panels wired in series.
- Fantastic powered roof vent fan with 4 speeds.
- Truma Aqua Go on demand hot water heater. Brand new, has not been turned on.
- 30 Amp SmartPlug shore power connection.
- (2) uninstalled BullFinch shower outlets ordered from England on ebay.
- Loads of paperwork and all the O&M manuals for all the equipment in a folder ready for the next owner.
- Full RV cover for the rig. Always stored out of direct sunlight.
- Just recently added large fold away grab handle for entrance and exit.
- 5 step staircase for entrance and exit.
I have spent hundreds of hours designing, ordering, building, fabricating, and making this a dream flatbed camper set up with a layout that I believe to be the best use of space. This project is 80-90% complete but I no longer have the time or energy to designate towards completion. And with another small kid, it no longer fits the bill for the family. This setup will save you thousands and thousands of dollars and time from trying to accomplish a build out from scratch. Trust me, I’ve done it!! You can use this camper today for a weekend, a week, or full time.
I have hundreds of photos of the build process for anyone interested.
I’d be willing to sell with a 2020 Ford Gas F-250 Superduty with custom aluminum flatbed for the right price. Truck has less than 30k miles. Full size spare tire, airbags, and front hitch receiver to name a few upgrades.
$35,000 for the camper. I would be willing to discuss an all in package with anyone interested.
Attachments
Last edited:
