Rusty
Senior Member
The front and rear of the NCO's have a pair of guides which align the top and bottom section for raising and lowering. In the CO's they are on the rear only, right behind the hydraulic tubes.
I've got a leak, through the bolt which holds the front, outside guide. The outside acorn nut is locked and I'm having a heck of a time removing it to seal the bolt and replace the acorn nut....
Does anyone know what type of bolt head is on the opposite side of the acorn nuts...standard slot or philips, flat or pan...I have a feeling I'm going to be making a tool to access the head without removing the top and the access is a 1/8" slot...ugh.
I've got a leak, through the bolt which holds the front, outside guide. The outside acorn nut is locked and I'm having a heck of a time removing it to seal the bolt and replace the acorn nut....
Does anyone know what type of bolt head is on the opposite side of the acorn nuts...standard slot or philips, flat or pan...I have a feeling I'm going to be making a tool to access the head without removing the top and the access is a 1/8" slot...ugh.