Laguna-to-Crestone
New Member
I thought I would share my new table for my Ocelot with roll-over couch. I mounted the table on the cabinet in front of the water tank using oak mounts that allow the sliding cabinet door to slide behind them. The table sits on folding shelf brackets. I added a couple of braces to the inside of the cabinet - a piece of 1.5" X 3/4" wood that ties the front of the cabinet to the back that I accessed through the drawer opening and an angle iron inside the cabinet.
The table is 18" X 32" and made of 3/4" oak plywood.
The table is 18" X 32" and made of 3/4" oak plywood.