ATC custom camper on a Gladiator

Old Crow

Searching....
Joined
Jan 10, 2015
Messages
1,066
Location
South Central PA
This came up on the Facebook ATC group a few days ago. The video says the "Jamper" is a collaboration of Lake Tahoe Custom Campers and ATC. Very interesting build... Arctic Tern window, rear seating, Planar diesel heat, DC-DC charging, etc.

(Tour of the camper portion of the rig begins at 3:29)



Lake Tahoe Custom Campers website
 
Also note the non-traditional use of what we would normally call the propane locker. It has a one-pound propane cylinder for the stove and a 2-1/2 gallon tank for the diesel heater.
 
A very small footprint - but very well executed. I love the galley cabinet build with extruded 80/20 aluminum and the pop out side window.
 
I remember calling Marty to ask about the Gladiator around the time this one had been finished IIRC. I ended up putting a full monty Bobcat on my Gladiator MaxTow but it required some modification to fit. It goes EXACTLY to the edge of the tailgate.

He was smart to move weight forward.
 
mopwater said:
I remember calling Marty to ask about the Gladiator around the time this one had been finished IIRC. I ended up putting a full monty Bobcat on my Gladiator MaxTow but it required some modification to fit. It goes EXACTLY to the edge of the tailgate.

He was smart to move weight forward.
I'd love to see a photo of your rig (but if you'd prefer not to, that's OK... just ignore that).

I'd also be very interested to know how the rig is working out for you, especially whether you'd consider the Max Tow option a must-have or nice-to-have option (for your purposes).
 
Check the photo thread! Would post more but on the road stopped for gas.

MaxTow is essential plus bags, swaybar. Mostly for the payload rating and 8spd else I’d be looking at OVRLND or the short shell
 

Latest posts

Back
Top Bottom