Electrical in line connector for short section of 6AWG?

[steve whiteside]

Gents, I need to do a repair on my Goal Zero Link module. Due to one thing or another I had to cut off a connector and am left with about 1/2" to 3/4" of 6AWG sticking out of the module. Can anyone point me to a connection method that won't add a bunch of heat but will be strong? I need to extend those wires with some good amount of strength. Usually I would use one of those Posi-lock connectors but they don't make them big enough.

Steve

 

[steve whiteside]

Even if it were exposed I think I could heat shrink it.

 

[PaulT]

Look at this butt connector.
https://www.westmarine.com/buy/ancor--heavy-duty-butt-connectors--P009_275_004_009?recordNum=7

Use waterproof adhesive shrink tube over it.
https://www.westmarine.com/buy/ancor--adhesive-lined-heat-shrink-tubing-alt--P009_275_003_003?recordNum=1

Paul