I have FWC Fleet on a Nissan Frontier with a short box. Because of the short box I have two bolts through the floor of the camper in the front and use turn buckles in the rear and tailgate is always down when loaded. Lining up the bolds is difficult when you have to line up a bold with the hole. To be able to nudge the camper left and right to align, I tried a new method. I set the jack stands on those large rectangular plastic furniture moving pads which rest on a piece of carpet sprayed with silicone. It worked, I was able to nudge the camper left and right by just pushing on the camper jack corners. When the bolts align above the holes, I lower the camper onto the truck. This was much easier than without the pads.