Hi-Lift mount

[jha6av8r]

Finally decided to make a place to mount my Hi-Lift. Got lots of ideas from here and EP and this what I came up with.

- 10' length of 2" x 2" x 3/16" cut into one 97 3/8" piece and two 10" pieces
- Hi-Lift LOC-RAC bracket
- Bolts, washers, and lock nuts - same as corner jacks

Not elegant but strong and functional. About $55 for material and LOC-RAC.

 

[GroovyDad]

Looks good. A creative way to stow it AND it's very accessible.

 

[ntsqd]

I don't know how well that mount clamps the handle, but if it can rattle at all I'd suggest one of these:
http://www.wildhorses4x4.com/product/HiLift_Isolator

 

[jha6av8r]

I don't know how well that mount clamps the handle, but if it can rattle at all I'd suggest one of these:
http://www.wildhorses4x4.com/product/HiLift_Isolator

Have a handle keeper installed. Thought the same thing.

 

[craig333]

Need one of those no matter how its mounted.