I'm loving my 1963 NCO 10' that I just recently purchased. I've been living in it for the past week while I'm working out of town and probably will be staying in it for the next month or so. I'm wanting to tweak my set-up I have slightly. Currently, I have it being pulled with my truck sitting in a truck bed trailer. My truck bed is only 6.5 ft long and I bought an 8 ft. truck bed trailer that it sits in.
What I'm wanting to do is get either a 10 or 12 ft. flat bed trailer (wanting tandem axle) because it sits lower and wont' bounce as much on the highway. My question is how would I make the boxes (lockers) that will sit under the top half of the camper to help support it? Would they need to be welded?
I'm not sure if they are really called lockers or not but I've seen them before on this forum with campers sitting on flat bed trailers.
Thanks for your help,
Joe
What I'm wanting to do is get either a 10 or 12 ft. flat bed trailer (wanting tandem axle) because it sits lower and wont' bounce as much on the highway. My question is how would I make the boxes (lockers) that will sit under the top half of the camper to help support it? Would they need to be welded?
I'm not sure if they are really called lockers or not but I've seen them before on this forum with campers sitting on flat bed trailers.
Thanks for your help,
Joe