pvstoy
Senior Member
I cobbled together a hands free shower head holder that is small and light weight and best of all I used scrap lying around in the shop.
See images below
.
- I had scrap "Z" bar left over from my solar panel mount.
- Two rivets.
- 1/2 inch PVC pipe riser with threads (1/2 inch threads to screw into shower holder)
- Shower holder that comes with a hose and hand-held shower head.
- Used a uni-bit and made hole in one side of "Z" bar that was still small enough to be tight against the PVC threads.
- Shaved down the end of PVC to be flush with mating the second "Z" bar.
- Shaved down the PVC side that rest against the "Z" bar so it would be centered in the height of the "Z" bar and result it can't rotate.
- Riveted the two "Z" bar together and offset the second one as a stopper for the PVC.
- Took the shower holder and took some material away from the holder part for the shower head to fit better. Added tape to shower head for stopping the rotation while using.
See images below
.