Need to know turnbuckle sizes for 2020 swift ASAP

[Holmes]

Picking this camper up tomorrow. Just found out it doesn't have any turnbuckles. Its going on a 2018 tacoma short bed. Any and all info is appreciated.

 

[Jon R]

My dealer seemed to have one turnbuckle size for all models. My Grandby needed an additional 3 inch quick link for all four corners. The turnbuckle hooks are 5/16ths diameter steel and 5 inches overall length. The center body is aluminum and is 6 inches long. Minimum overall length is just over 10 inches. Maximum overall length with full thread engagement is 15.0 inches

 

[Holmes]

My dealer seemed to have one turnbuckle size for all models. My Grandby needed an additional 3 inch quick link for all four corners. The turnbuckle hooks are 5/16ths diameter steel and 5 inches overall length. The center body is aluminum and is 6 inches long. Minimum overall length is just over 10 inches. Maximum overall length with full thread engagement is 15.0 inches

Hey, thanks Jon for that info and photo. I was able to stop at an Ace on the way and think I'm set. I think the internal bed mounts should have the quick links on them but if they don't that'll be a quick easy purchase.

 

[Lighthawk]

I think the internal bed mounts should have the quick links on them ...

Are you talking about the factory tie downs or forged eyebolts?
I'm not a Tacoma expert but it's my understanding composite beds require additional metal plates.

 

[Seattle Mitch]

Composite bed Tacoma you need to have the special bars attached to your bed.That's where the hooks are that you attach the turnbuckles to