Maddogs
Member
Am using a Noco Genius 10 for first time when storing FWC Hawk camper for winter. Have 2 of the 190 amp/hr factory installed 6v Deka Intimidator AGM batteries in series for 12v.
Before I powered up the Noco my Renogy battery monitor read 92% charge. When I powered up the charger a couple days ago and set it to 12v AGM mode, it took a few minutes then the status light went to and remained at green.
I go back out today and see the status light still pulsing green but the battery charge percentage is still 92% - I would have expected this for sure to be 100% by now? Literature states 5-7 hours to full charge for this size\type of battery. Or could it be something to do with the battery monitor (attached to factory installed shunt) not reading accurately?
Main battery disconnect switch is and has been off from the get go. Camper has been covered with a tarp the entire time and engine not run so no other charge coming from solar or alternator.
Before I powered up the Noco my Renogy battery monitor read 92% charge. When I powered up the charger a couple days ago and set it to 12v AGM mode, it took a few minutes then the status light went to and remained at green.
I go back out today and see the status light still pulsing green but the battery charge percentage is still 92% - I would have expected this for sure to be 100% by now? Literature states 5-7 hours to full charge for this size\type of battery. Or could it be something to do with the battery monitor (attached to factory installed shunt) not reading accurately?
Main battery disconnect switch is and has been off from the get go. Camper has been covered with a tarp the entire time and engine not run so no other charge coming from solar or alternator.