I did a search and didn't find anything but I remember reading a post about installing Pirelli gaskets. I took the first piece of trim off and noticed that the gaskets did not go all the way to the corner of the camper. I.e. the end pieces do not meet the side pieces and as a result, there's a gap there.
I'm thinking I should run my new Perelli gaskets all the way to the corners so that they are all touching. Is this correct?
Thanks for any help,
Joe
Yes, the gaskets are all nailed on too.
I'm thinking I should run my new Perelli gaskets all the way to the corners so that they are all touching. Is this correct?
Thanks for any help,
Joe
Yes, the gaskets are all nailed on too.