Maybe someone out there can clear up some confusion for me....
Here's my wires coming from the panel, and the plug it's going into:
Attach0 (7).jpg zamp plug.png
When I check the receptacle with a voltmeter, touching the red probe to the exposed prong on the left, and the black probe to the covered prong on the right, I'm getting a positive voltage reading of 14.5.
The wires that plug into that receptacle have the red wire plugging into the left side (i.e., the side with the exposed prong), and the black wire plugging into the right side.
My conclusion is that this Zamp plug is the correct polarity, and NOT reversed like many of them are.
Am I missing anything? I'm confused because when I talked with FW yesterday they couldn't give me an answer one way or the other on how my camper was wired.
Thanks.