2trout
Senior Member
Hi All,
I always enjoy reading posts here, and I'm hoping someone can provide a bit of help.
I have a Hallmark truck camper with 100w Renogy flexible panel, and an HSQT PMW 30A Controller. I have contacted HSQT but as of yet i have not heard back from them.
On A recent overnight, when we turned on the lights in the evening it was apparent that out batteries were almost out of power.
The controller showed the batteries were at 0, and in full sun, the controller shows no power coming in.
This weekend I finally had a chance to do a bit of trouble shooting. Multimeter testing at the solar panel seems to show Volt and Amp output are within specs, same thing at the cable ends where they connect into the controller itself. But at the controller output, multimeter seems to show no output? Can that be correct, and if so, is the controller shot? Thanks for reading!
Trout
I always enjoy reading posts here, and I'm hoping someone can provide a bit of help.
I have a Hallmark truck camper with 100w Renogy flexible panel, and an HSQT PMW 30A Controller. I have contacted HSQT but as of yet i have not heard back from them.
On A recent overnight, when we turned on the lights in the evening it was apparent that out batteries were almost out of power.
The controller showed the batteries were at 0, and in full sun, the controller shows no power coming in.
This weekend I finally had a chance to do a bit of trouble shooting. Multimeter testing at the solar panel seems to show Volt and Amp output are within specs, same thing at the cable ends where they connect into the controller itself. But at the controller output, multimeter seems to show no output? Can that be correct, and if so, is the controller shot? Thanks for reading!
Trout