Thevulture
Advanced Member
Hello.
I recently purchased a FWC Falcon Shell in Portland that was listed a few weeks ago. I guess my excitement got the best of me and I didn't catch that it was almost 12" shorter than my bed (2001 Tundra AC). I went up to Portland to pick it up this weekend and after seeing it on my truck I decided I want an Eagle or Fleet. It should fit Crew Cab/Short bed trucks like the 1st and 2nd Gen Tacomas.
I gave it a good scrub down and decided to rip up the old floor and put something fresh flooring in to help make it look nice. I discovered the floor pack had bad rot in the rear passenger side. There is some minor water damage to the panels and lifters, but there isn't any stink or must, the roofs lifts easily and the canvas is in great shape.
I'd like sell this and make back what I have in it (gas, hotels, cost).
I emailed Marty at ATC about replacing the floor and he said it would roughly be $500-1000 redo the floor pack (depending on how much prep is done and finishing is wanted).
68 1/2" wide
45" wide at wheel well (could trim up to 3" on each side, as the floor pack was extended)
51" wide above wheel well
43" from floor to cab overhang/bed area
51" total height
63" long (including the front bumper stops)
I'd like to get $3500obo for it.
I am located in Los Angeles and could deliver.
I recently purchased a FWC Falcon Shell in Portland that was listed a few weeks ago. I guess my excitement got the best of me and I didn't catch that it was almost 12" shorter than my bed (2001 Tundra AC). I went up to Portland to pick it up this weekend and after seeing it on my truck I decided I want an Eagle or Fleet. It should fit Crew Cab/Short bed trucks like the 1st and 2nd Gen Tacomas.
I gave it a good scrub down and decided to rip up the old floor and put something fresh flooring in to help make it look nice. I discovered the floor pack had bad rot in the rear passenger side. There is some minor water damage to the panels and lifters, but there isn't any stink or must, the roofs lifts easily and the canvas is in great shape.
I'd like sell this and make back what I have in it (gas, hotels, cost).
I emailed Marty at ATC about replacing the floor and he said it would roughly be $500-1000 redo the floor pack (depending on how much prep is done and finishing is wanted).
68 1/2" wide
45" wide at wheel well (could trim up to 3" on each side, as the floor pack was extended)
51" wide above wheel well
43" from floor to cab overhang/bed area
51" total height
63" long (including the front bumper stops)
I'd like to get $3500obo for it.
I am located in Los Angeles and could deliver.
