We had this in a shell model FWC and was going to cut the wood down to fit perfectly in the middle but also worked as is. This would be great to pass onto another member with shell or Callen or ??
Super clean and ready for next user
Originally made for the rails of a truck camper like a Truck, Callen or Four Wheel Camper Shell
Designed to stack on the forward portion of the bed when not in use
Keeps the truck bed still useable and open for large items and gear
Can be used as single bed or makes into large king size bed
Plywood panels are varnished and offset so the joints of the wood and mattress pads don't mix
Maple stiffener on edge
Custom upholstery with fabric on 5 sides and vinyl on bottom
Has full zipper with 4" foam
(2) Mattress 4" think, 37-1/4 wide, 72-7/8" long
(1) Plywood 3/4" thick, 40" wide, 71 3/4" long
(1) Plywood 3/4" thick, 36" wide, 71 3/4 Long
SOLD
Super clean and ready for next user
Originally made for the rails of a truck camper like a Truck, Callen or Four Wheel Camper Shell
Designed to stack on the forward portion of the bed when not in use
Keeps the truck bed still useable and open for large items and gear
Can be used as single bed or makes into large king size bed
Plywood panels are varnished and offset so the joints of the wood and mattress pads don't mix
Maple stiffener on edge
Custom upholstery with fabric on 5 sides and vinyl on bottom
Has full zipper with 4" foam
(2) Mattress 4" think, 37-1/4 wide, 72-7/8" long
(1) Plywood 3/4" thick, 40" wide, 71 3/4" long
(1) Plywood 3/4" thick, 36" wide, 71 3/4 Long
SOLD
