tk254254
Advanced Member
Hello,
We are going to move my used 86 keystone camper to a different garage to begin resizing the floor pac. The rig it is temporarily going on is not setup with camper tiedowns. Additionally, this camper was permanently mounted so there are no tiedown points to use. The current plan is to strap it down internally using the front bedstakes (and single access holes), and then throw a strap over the entire camper at the rear of the bed.
The other bad news is that this keystone will be going on a short bed with the tailgate down.
Has anyone done any purely temporary redneck rigging such as this to transfer a FWC around? Like I say, this is purely temporary and there are no plans for speed trials or G force measurements in the twisties.
Thanks.
We are going to move my used 86 keystone camper to a different garage to begin resizing the floor pac. The rig it is temporarily going on is not setup with camper tiedowns. Additionally, this camper was permanently mounted so there are no tiedown points to use. The current plan is to strap it down internally using the front bedstakes (and single access holes), and then throw a strap over the entire camper at the rear of the bed.
The other bad news is that this keystone will be going on a short bed with the tailgate down.
Has anyone done any purely temporary redneck rigging such as this to transfer a FWC around? Like I say, this is purely temporary and there are no plans for speed trials or G force measurements in the twisties.
Thanks.