This summer we picked up a used Ranger II in the Sacramento area. We will be using it on our ranger pickup. Like many others we've been working on a remodel, fixing a few problems, and making it "ours". Some of the interior changes include removing the refrigerator as we've used ice chests for years and want the storage space. We have replaced the original sink and stove moving them both out from under the bed slider. Anyone here want a used stove and sink? Free if you pick them up. We are also putting two drawers in in place of the two bottom sliders in the lower cabinet. The original couch had been modified (being kind here) by the previous owner. We are doing a small dinette setup borrowing on many of the fine ideas posted on this forum. Thanks for sharing! We removed the wings and notched out the furnace area so it would fit the ranger's bed. I'll attach a few photos. My brother had some bumper material from off a car hauling trailer that we thought would work well for lower bumpers against the truck bed. This is a long strip of aluminum channel covered with rubber bumper that slips on two channels that we just cut short pieces from. We will keep you updated with photos as the project progresses.
