Search results

New Lowered Price!: 2007 Grandby Four Wheel Truck Camper

2007 Grandby..custom Tough times call for.....:( 2007 Grandby Four Wheel Truck Camper

The trouble with traditional flatbeds is how they're built. Which is that the whole bed is roughly the same height as the top of the rear fender wells in the original pick-up bed. For most uses that is desirable, but for camper use it isn't necessary. Set the deck down between the tires and...

Here is mine....Flatbed manufactured locally....boxes bought from amazon...8 foot bed. A little bit wider than original bed.

great info. Thanks Everyone for there input! I won't be so paranoid next time. I don't mind sleeping down low, and having top down...solo....its a little more difficult with 2 people. And if you want to make a cup of coffee. (thats with the top down)

Hello all, Have been doing some trips to the desert lately. My last trip there was a high wind event. winds of 30-40 with gusts to 60 -70MPH. I was paranoid about having the camper popped up to due the high winds. Is this something I need to worry about? What are the wind limitations with...

Thanks for the replies fellas. I have come to a conclusion that I just had to caulk up around the window some more. I do not have a pass thru window on my truck. I would be interested in getting rid of the opening window for a solid piece of glass like Tom speaks of. Any chance of that...

Stan, When the rain hit a couple weeks ago, I was traveling from Las Vegas to LA. I drove in the good driving rain for a couple hours. Upon entering the camper after traveling in rain, I noticed the pass thru window to be soaked and the cushion to be totally soaked. Kind of a bummer. The...

Brian, I made my own support plate a couple years back. I ended up routering out the bottom side of the wood that sat over the plate and bolt head. When I was done everything sat flush with no issues. I will look to see if have any pics. -Chris Chris, Thanks for your response. I did exactly...

Got the plates installed today. Pretty easy job. However I am still stumped on what everyone is doing with the bolt heads that are on the couch side. The long narrow piece of wood won't lie flat now that the plates and rounded bolt heads are there...what to do?

Stan, Thanks for your response. I am looking at beefing up the existing holes. When the turnbuckles are tighten it starts to pulls the "elevator" bolt through and you hear wood start crunching...I am using 4 spring loaded turnbuckles at the moment to the jack bracket. ...Camper is a 07 Grandby.

Received my plates from Terry at FWC. He sent the plates and bolts only. I am looking into doing this repair soon, and was wondering what everyone was doing with the plate protruding upwards into the finish wood. It looks to me that the finish wood lies flat on the area of repair. ??

Thought I would share my Limited experience on this topic. I owned a hard side fiberglass '07 truck camper. I had it for 2 years. In the time I had it, had to have the fiberglass under warranty fixed within the first 3 months. I really didn't even use the thing yet..and spider web cracks...

This is the one I ended up using. http://cgi.ebay.com/ebaymotors/Micro-Monitor-JRV-4-TANKS-and-BATTERY-pump-switch-NEW-/180379835911?pt=Motors_RV_Trailer_Camper_Parts_Accessories&hash=item29ff79de07#ht_578wt_1167 Sweet! was wondering where the $15.00 version was....was only finding ones in...

Thanks guys! Appreciate your insight. I will try to find one from ebay....or maybe Stan would happend to have an extra around the shop there???

Hello forum, I recently have bought a used '07 Grandby. Used to have a hard side that weighed twice as much...this is great...Hardly notice it on the Cummins. Anyway, upon filling the fresh water tank to flush, I noticed that the monitor panel is not registering the level of water. Always...

I would recommend either the Deadman creek area just north of Mammoth. Or Virginia Lakes, Green Creek road. Both these spots offer dispersed camping(free) and the crowds should be minimal. Deadman creek is easier to get to with your rig, however the Green Creek area would be doable also. A lot...