Search results

Modifications inside the Tundra cab were minimal. I replaced all interior lights with leds and removed the back seat. After removing the seat I put 1" thick closed cell foam across the area where the seat use to be for sound deading. Then finished it over the top with carpet. On one side of...

Good eye! I modified my blaster stove from my river gear to use with the Zodi. It connects via a quick connect I installed coming off the main propane for the camper. The Zodi got a lot of use when we were boondocking for weeks on the beaches of Baja Mexico. Here is a look at the propane quick...

Storage for hanging shirts and clothing below the bed Storage for shoes and sandals below the bench seat.

Speaking of being obsessed with using every space available I'll post some pictures of mods I have done and let them do the talking; as always message me or post here if you want more info for how I did it: Spice rack holder I keep my sunglasses in here

Hi buckland, if you have any recommendations for places to visit or camping we would love to hear them. Thanks, Josh, Shannon & Kaleb

I had some space between the overhang of the camper and the rear bumper that was bugging me to be used. 20mm ammo cans fit perfect, 6 of them!

At the base of all this is a fairly stock 2003 Toyota Tundra. I have E rated Michelin tires that I already had before purchasing my camper. I just recently got a new set in San Diego before crossing the border into Mexico. These are the only tires I know of that you can get over 50,000 miles...

No problem Taku, I have 4,500 miles on the pool noodle air dam so far. I have had an increase of between 1-2 miles per a gallon with it. I'll keep updating on how everything performs as I continue to head south.

I manage the entire system with a morning star remote meter:

Hi Long horn, I have two 65 watt unisolar mats on my roof that stick on. I have the wires running down the outside of the camper and drilled no holes in the roof. I got the two mats with all wiring a fuse box and morningstar mppt controller for $340.00. I did the install myself, was very...

I have a morningstar 300w inverter blue sea fuse panel wired directly to the battery for added auxiliary terminals This all fits snug, very snug next to the battery. A lot of patience and time to get it all in to such a small footprint. Here is a picture of the entire project:

Let me explain where all the power comes from: In the original house battery location sits a die hard 31m platinum on the roof is two unisolar 65 watt solar mats these are run in parallel to a fuse box and then to a morningstar mppt controller

I have a die hard platinum 31m (agm) with a morningstar mppt controller, as I look at my morning star remote meter right now it says my max vdc has been 15.08.

The heater is way more than I need to heat my fwc eagle. Has kept us warm in freezing temperatures in the desert.

Camco Olympian Wave 3 heater. The heater than sits on the counter on top of the fridge or it mounts to the back wall and is out of the way. Its worked out good so far.

400 watt motorcycle amp powers two sets of speakers one set inside (permanetly mounted from the roof next to tv) and another outside that can be moved around depending on where we are outside the truck Volume control for the amp is located above fridge in control center Ipod connects to the amp...

here is a picture of the gas line for the heater.

The gap between the fridge and the top of the counter provided a lot of use. First you have to access it. The counter went onto a spring loaded hinge, the fridge was lined with reflectix and I used plywood to create a cabinet. A gas line t's off the fridge line and runs inside to a quick...

Construction of the air dam took some time to figure out but once I settled on a design it was one of the least complicated projects. A pool noodle mounted to the underside of the camper handles the task efficiently.

Hi ski3pin, besides installing the outside latch I put v-groove rubber edge trim on the cutout (made by trim lok) for a finished look and cover the sharp edge. To give you an idea of what I can fit in this space: dutch oven, 3 burner camp stove, blaster stove, collapsible outdoor table...

11"3/4" x 16"1/2" No nipples installed. It has 4 outlets: in for fresh water, out to sink, vent hole and a outlet on the bottom for dumping the water in the tank. The outlets are not flush mounted on the tank surface, They are all threaded. It also has wire connections for hooking up an...

Yes the paco pads are expensive but for me they serve dual duty as my sleeping pad when I am on the river. When the weather is nice and calls for sleeping outside the camper or star gazing you can lay them out on just about any surface and they will take the abuse.

If you are going to install a permanent water holding tank below the counter why not install a hand pump faucet over the sink? They are all over the internet for under $30. I have a tank from my eagle for sale if you are interested...

Moving up along the water system I replace all the lines as they were dirty and the electric water pump because whatever was in the lines had to be in there as well. While I was doing this I installed an everpure water filter. This filter works on the super chlorination method. The filter...

I use a Morningstar sure sine 300 watt inverter that is hard wired to two 120 volt receptacles, This powers sensitive electronics like laptop computers and tablets that need a pure sine wave power to operate normally and not be damaged. I also use a blue sea usb charging port for ipods, phones...