Search results

2009 Four Wheel Eagle, Vancouver, B.C. $14,000 can. Original owner, mint, dinette http://vancouver.en.craigslist.ca/pml/rvs/4565735636.html Sold July 18th

[/b]Has anyone tried fleece as soft-side insulation?[/b] Yes We bought a fleece King Sized Blanket and spent more on velcro than the fleece. A little measuring, some cutting and sewing and we had liners. We tried it and thought it made a difference but it was 'more stuff to pack' . The funny...

Thanks. Anyone know of an awning that can be mounted over the back? I'm not going to build one as others have. This link shows a Shady Boy attached over the rear door of an Eagle. Two two inch long pieces of 1 inch aluminum square stock make perfect spacers to allow the clearance needed to...

http://www.wanderthewest.com/forum/index.php?/topic/4824/page__p__52964&#entry52964 This link shows the aluminum step that we use, it fits into the receiver hitch and the main difference from some of the very nice looking steps shown above are the two side supports that sit on the hitch mount...

You might look at this photo of the dinette in our Bobcat. Marty was able to find a short table leg that is just right for that mount. You might ask him where he found the leg. http://www.wanderthewest.com/forum/index.php?/gallery/image/6561-dinette-in-a-bobcat/ His mount also gets the foot of...

We used the standard issue table but I unscrewed the base mounting plate and moved it a few inches. Table is now nearer to window and there is just enough room for one ass between the counter and the table Unfortunately, our model only had an inch between the existing table and the window...

You may be able to buy a shorter pipe and save a hassle. If not you are looking at cut and weld and paint, in the middle to save the tapers. I made the table for my dinette and made a 1/2 round on the end we get in on. Made a big difference in getting in and out. Pictures here...

We were thrilled to get an early dinette model, opposed seats with a table leaving a space to walk between the counter and the table when one person was sitting. The table that came with our Eagle was 16 inches by 32 inches, leaving a 12 and 1/2 inch space to move between the counter and the...

I've got an Eagle with a Dinette in Chilliwack, about an hour out of Vancouver. If you do go out the valley we are close to the Freeway.

Took this a couple of weeks ago in the Yukon. Looks like this is going to become much more common. We saw over 20 bears in one day on the Stewart Cassiar Hy. mid June. Mostly black but a few grizzlies,they even seem to pose for the camera. and I like bacon but in this country.....

Thank you, Guitar Center still sells these for $59.95, it took 3 minutes to undo the three small bolts that hold the tripod on, a few seconds to scavenge the rubber feet and put them on the speaker lifter and it works great. My wife was thrilled and raised the roof in no time with ease. I...

Dimensions for LTZ Hopefully this makes sense when used in reference to the pix above. -Step size-28 inches by 7, 2 1/2 inches thick with a 1 !/4 inch wide strip underneath. The thickness will be determined by the thickness of your checkerplate and the square stock, just keep a two inch...

very nice. I thought of something like that, only you have more talent then I do, you actually made one. good job Thank you, if you ever do go ahead it is pretty straight forward but I would be happy to send dimensions.

Try to get there as close to June 21st as you can as the sun doesn't go down, we had an hour or so of dusk.