Search results

Thanks for the info guys. I'll use a stubby screw driver and do the hand tight plus 1/2 turn. Kim

When I had my Hawk installed in December I asked Brenda at FWC if the turnbuckle hold downs tightened clockwise or counter clockwise. She said that they tightened clockwise, but the tech who installed the camper said they tightened counter clockwise. He said the reason for this is that it's...

I'll try to take some pics if it ever stops raining here. The only "furniture" I'm going to add is a removable 24" wide bench/bunk across the cab side of the camper. I plan to store a Luggable Loo, 30quart chest style refrigerator, and some storage bins under the bench. I can access these things...

Thanks again, Rando. Looks like the Cyrix is a win, win for me if I decide to go Lipo.

Thanks Rando. If I understand correctly, the Victron Cyrix would be the easiest option but would not allow the lithium battery to be charged while driving my truck. Not sure if my rooftop solar could keep up with the power draw from the fridge. Any wiring upgrade is beyond my capabilities. I'll...

After waiting 10 months I finally have my new Hawk Shell. FWC installed it yesterday and it's beautiful! Now to start outfitting it. I ordered my Hawk with a propane heater and cook top. I also got the roof mounted 160W solar system to keep my 12V AGM battery topped off and a single MaxAir fan...

Thanks Rando. Do you have a pic of this set up? Kim

I talked to my mechanic yesterday and they said that the Firestone air bags are available but the on board compressors, remotes, etc. are on indefinite back order. The bags can be installed but need to be filled manually. The compressor and other accessories can be installed when they become...

I like the Beagle pre wash idea. I have a Weimaraner but probably won't use her for a pre wash since she has a habit of eating dog poop. Thanks all for the ideas.

Thanks guys. The paper towel idea is perfect. I don't know why I didn't think of it. What's a good brand of bio degradable soap? Kim

I'm curious as to how Shell owners wash their dishes and dispose of their grey water. I ordered my Hawk Shell model because of weight considerations given my F 150 payload limitations. I can figure out how to cook, eat, and sleep in the shell, but I could use some ideas for dish washing. Any...

Hi David. I'd very much like to see your set up. I looked for, but didn't find, what you described on line. Please send photos when you can. Thanks, Kim

I like the 24" width for a couple of reasons, Rich. It maximizes limited floor space and side bench space. Also, my living room couch is only 24" wide and I'm able to nap way more than I should on it. I will be sleeping on the cab over bed almost all of the time and only need the lower couch for...

I may have found a solution. I found a 6'x2' solid top aluminum shelf that will support 800 lbs. It's about 1.75" thick, would sit flat on the benches, has no protruding rails, and could easily handle the 40" span between the camper benches. It only weighs 20 lbs. and costs less than $200. I...

Thanks for the post, Sleddog. I am concerned about the side rails as well but am thinking a firm 4" high foam bed pad would alleviate that problem. You're right about the back not being flat because of hinges and aluminum bracing but folding one section up to lean against the camper front wall...

Thanks Paul. Best price I've seen for one of these, and best load bearing specs as well. Most of the wheelchair ramps I've looked at max out at 600 to 800 lbs.

Thanks yet again Rich. The Froli springs are interesting. I may have found another solution to my platform dilemma. I've been looking at aluminum wheelchair ramps. I think a 6'x30" foldable ramp would easily support my weight and folded in half to 15" wide would work as a settee with the FWC...

I'll probably go with the full length framed plywood platform Rich. Seems like the only viable option now. What are people using for a mattress/settee pad on these DIY platforms. I'd need something firm enough to support my 230 lbs both setting and sleeping. Thanks, Kim

Thanks Korslite and JWL. Looks like I will have to rethink my platform plans. There won't be space to install cleats to support a platform. It seems that my best option is to support a plywood shelf by the bench tops and install a support mid span from the floor to the bottom of the plywood...

Anyone have a pic of the newest Hawk Shell interior? I received a comment from Stan at FWC on another of my posts about side benches and he said they have changed the top opening side benches to front opening benches. This will definitely change my options for securing a sleeping platform. I...

Thanks JWL.

Thanks Stan. By "opening on the front" do you mean the sides of the benches will open into the floor area? Any pics available? Kim

Thanks a lot, Rich. This info is very helpful indeed. I assume that this access will allow me to attach washers and nuts to my through bolted platform cleats I'll need to support my framed plywood bench. Kim

Thanks David. Are they hinged? Kim

Do the tops of the 2021 Hawk Shell side benches come off? If so, are they hinged in the back or do they lift off. When I was ordering my shell in Woodland the salesman didn't mention that the tops could be opened. It seems that if they open there could be storage opportunities on either side of...