'15 FWC Fleet shell for sale near LA

DSD277

Advanced Member
Joined
Jun 17, 2015
Messages
67
Location
Arcadia, California
Selling my ‘15 Fleet shell w/ custom riser for uses with 2nd gen Colorados. Without the riser, fits Tacomas .
Camper has
camper jacks
8’ Fiamma F45S awning
Fantastic fan
160 solar panel , and split charger controller (75% to house battery, 25% to vehicle)
Group 34 Optima battery
Propane furnace and 2 burner cooktop
4 exterior gas struts
2 12v sockets, 1 dual USB socket
Added a interior LED lamp with switch to door to illuminate inside shell without climbing in
Spare backup camera mounted to riser
The custom forkliftable riser frame to elevate camper to clear sides of truck bed, rear folding step for easy access to camper when top is down or up. ( with top down, lower step is at a level for easy transition from standing to your knees in the shell. Upper step for stepping up into the shell when top is up. Designed for my height of 6’1 and legs with 30” inseam)
Thread on riser and step here:
https://www.wanderthewest.com/forum/topic/13135-2016-colorado-4x4-cc-sb-and-fleet-sheel-w-forkliftable-riser-and-other-mods/
Camper fits a Tacoma, riser is only needed for the Colorado, either 5 or 6' bed.


located near Los Angeles in Arcadia



Dave
dsd277@sbcglobal.net
 

Attachments

  • DSCN0765.JPG
    DSCN0765.JPG
    174.8 KB · Views: 646
  • DSCN0954s.jpg
    DSCN0954s.jpg
    123.2 KB · Views: 680
  • DSCN0951s.jpg
    DSCN0951s.jpg
    109.4 KB · Views: 509
More pics of the interior. I also have a steel dolly with swivel casters that goes with it
 

Attachments

  • DSCN1091s.jpg
    DSCN1091s.jpg
    134.1 KB · Views: 504
  • DSCN1092s.jpg
    DSCN1092s.jpg
    109.6 KB · Views: 583
  • DSCN1093s.jpg
    DSCN1093s.jpg
    116.3 KB · Views: 608
  • DSCN1094s.jpg
    DSCN1094s.jpg
    99.8 KB · Views: 548
There is a pic of it in the link , along with the step.
The riser works with and without the tailgate in place
 

Attachments

  • DSCN0929s.jpg
    DSCN0929s.jpg
    149.4 KB · Views: 263
  • DSCN0931s.jpg
    DSCN0931s.jpg
    150.1 KB · Views: 255
There is also a steel dolly w/ aligning tabs that goes with the package. 5" HD swivel casters w/brakes. Needs painting since it was put into use right after being made. Surface rust only
 

Attachments

  • 20181026_125849_resized s.jpg
    20181026_125849_resized s.jpg
    236.2 KB · Views: 192
I haven't been updating this listing due to health reasons.
In the mean time, I have mounted the camper onto a different truck. It is now on a 2019 Ford F-150 Supercab using the same riser adding 1 bar in the front of the bed. I'll be adding pics later.
 
Photos of the Fleet on the F-150. Though it looks tight, there is just under 3" of clearance between the underside of the cab-over and the cab. Also in the method of the base installation, the camper can only move a quarter inch laterally, so stays centered in the bed
 

Attachments

  • IMG_20201121_160244144s.jpg
    IMG_20201121_160244144s.jpg
    98.7 KB · Views: 176
  • IMG_20201028_143517586s.jpg
    IMG_20201028_143517586s.jpg
    109.1 KB · Views: 189
  • IMG_20201028_113658166s.jpg
    IMG_20201028_113658166s.jpg
    118.2 KB · Views: 196
  • IMG_20201028_143542884s.jpg
    IMG_20201028_143542884s.jpg
    143 KB · Views: 164
Update: Camper still for sale. Includes NovaKool R3000 12/24v 2.5 cu ft shallow fridge (only 16" deep cutout needed). Never made cabinet or installed. Only used 1 night. I have come to realize I'll never have the energy to complete or use it.

Also after the sale of the Fleet shell, the 2019 F150 SuperCab shortbed will be for sale. XLT, 3.5Ecoboost, 10 spd auto, 4x4 , 36 gal gas tank, trailer controller, pw/ps, power seats, Sirius, Nav, 40/20/40 cloth seat, much more I can't remember now. 1,300 miles ( yes only 1.3k miles). $45000.
 
So if you're willing to sell the NovaKool R3000 separately, I actually am still on back-order and would LOVE to get one right now. And funny, I'm actually in the Los Angeles area myself. You say you've never even installed it? That works great for me. DC 12/24v only? Or 12/24/120v auto-sense? Left or right hand opening? How much do you want for it?
 

New posts - WTW

Back
Top Bottom