2011 Fleet LED Conversion

[badtoytrd]

I know this has been discussed but I am not sure if there has ever been a down and dirty of what is needed to convert an older FWC to LED. I am a power miser so anything to save a bit of power is a must. I have converted my overhead lights, porch light and rear flood lights to LED. Below is a list of what I used to complete this conversion.

Overhead light (you have to remove ballast but not hard): http://www.m4products.com/t8-120-3528-18-nw-f15t8-natural-white-18-t8-led-tube-light-12v-4500k/

Porch Light: http://www.m4products.com/1156-10-5630-nw-small-bulb-head-with-ba15s-base-1003-63-natural-white/

Rear Flood Lights (somewhat white and not as bright but still plenty bright): https://www.ebay.com/itm/2x-H3-9-LED-12V-Fog-Light-Bulbs-Driving-Lights-Replacement-Bright-White-NEW/172089511817?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Hope this helps those of you wanting to save a bit of power.

 

[wi_hawk]

I ordered the 12v/dc fluorescent interior lamps on my 2010 Hawk and have since replaced them with LED units along with the rear light about 4 years ago. Ordered the lamps from M4Products and have been satisfied with the results.