Flyfisher
Senior Member
I have a Norcold 3 way refer. When in gas mode the "temp" adjustment seems to have no effect on the flame size until the very last quarter inch of turn, when it reduces the flame size by half. That seems like only high or low and nothing in between. Have others noticed this?
I also noticed that there is a brass "V" screw as part of the gas control valve. However, it is screwed all the way in (closed) and as such has no effect on the gas flow. I am tempted to loosen it and see what effect it has on the flame adjustment, but I am also rather uncomfortable playing with gas. The valve looks as though it was designed to incorporate this brass screw as a way to adjust gas flow. Norcold has been pretty non helpful when I have asked them about this.
Any help would be appreciated.
Thanks,
Gregg
I also noticed that there is a brass "V" screw as part of the gas control valve. However, it is screwed all the way in (closed) and as such has no effect on the gas flow. I am tempted to loosen it and see what effect it has on the flame adjustment, but I am also rather uncomfortable playing with gas. The valve looks as though it was designed to incorporate this brass screw as a way to adjust gas flow. Norcold has been pretty non helpful when I have asked them about this.
Any help would be appreciated.
Thanks,
Gregg