K6ON
Old & Soft
OK guys, here's a simple solution to your problem, something Marty of ATC showed me several years
back. Remove the slider, measure from the edge of the window frame to edge of screen door and cut the slider to that length. Remove the (unscrew) the aluminum center vertical and remove center screen. Move the aluminum vertical piece over to the edge of the cut down door, drill two holes and re-mount. Re-screen the center section with plastic screen and you're done. Took about 15 minutes to do mine.
back. Remove the slider, measure from the edge of the window frame to edge of screen door and cut the slider to that length. Remove the (unscrew) the aluminum center vertical and remove center screen. Move the aluminum vertical piece over to the edge of the cut down door, drill two holes and re-mount. Re-screen the center section with plastic screen and you're done. Took about 15 minutes to do mine.