Fernweh
Advanced Member
Afternoon Campers,
I just purchased a manual Fiamma 45 from FWC and have been looking for installation and build videos to help with the project of attaching to my 2022 Fleet shell.
It looks pretty straight forward:
I just purchased a manual Fiamma 45 from FWC and have been looking for installation and build videos to help with the project of attaching to my 2022 Fleet shell.
It looks pretty straight forward:
- Attaches to the passenger side of the camper.
- Requires six drill holes through the body and frame of the camper and to mount brackets that connect the awning.
- Additional drill holes required in the base of the brackets to connect awning to bracket.
- Hardware positioned inside along wall where brackets mount onto camper? I'm having to avoid a few areas along the length of the camper to drill and attach bracket mounts through the camper frame. I can't drill thru the three wooden storage shelf above the dinette, I need to make sure I don't drill and attach hardware that will interfere with bed slide out. I should also avoid any interior wiring that may run inside wall space... I have a shell so Im sure there isn't any wiring. Can you think of any other considerations? Thanks
- I want to make sure the awning doesn't interfere with the roof opening and closing. I need to make sure to mount brackets low enough so they don't interfere with roof movement on the pop up. Thoughts, suggestions, ideas?