FWC EAGLE - dimensions of roof lift pan

[joseph.hinker]

Hello WTW,

Im rebuilding a FWC Eagle that was once a Grandby. I was wondering if anyone had the dimensions of the roof lift panels. I have the old Grandby ones but they are too big. What I need is:

- Length, width and thickness of the bigger piece
- Length and width of the smaller piece.

- distance from side of camper to where the panel starts.

I have been trying to do research on the panels and I saw that there is a newer wood panel and an older wood panel. The composite panels are really nice, I e-mailed FWC about the them and the price was way out of my budget.


Also pictures are great, so post them if you have them.

 

[Mark G]

I'll get that tomorrow for you.

 

[knoxswift]

I have an Eagle with composite panels. It's the Extra headroom top. If you like the taller panel measurements let me know. I forget how much taller it is then stock but it was only offered 1 or 2 years before they canceled the Eagle model.

 

[Mark G]

2000 Eagle shell: Overall width: 68", inside width: 65 1/2"
Bottom lift panel is 1/8" masonite, 58" x 22". hinge pin is at 13 1/2"
Top lift panel is 58" x 12 1/4".
Top of sidewall to roof is 25".
Send me an email and I'll send you pix. mark@markgentry.com

 

[joseph.hinker]

I have an Eagle with composite panels. It's the Extra headroom top. If you like the taller panel measurements let me know. I forget how much taller it is then stock but it was only offered 1 or 2 years before they canceled the Eagle model.

More headroom would be awesome. Do you think you could get me the dimensions?

 

[knoxswift]

So sorry I have been offline for a while. I will post dimensions tonight

 

[knoxswift]

So again sorry for the delay.

The canvas up is about 30" high.
Inside headroom is about 76"+.

The panel setup is the same front and back.

29 1/4" tall open with the hinges exposed top and bottom.

The top half panel is 47 3/4 wide and 14 1/2" tall.

The bottom half panel is 47 3/4" wide along the bottom and 24" wide at the top.

The line of rivets along the bottom panel measures from the bottom 1/2" and 14" also where the taper down starts to th 24" with at top.

I attached photos in case you want me to measure anything else.